澳大利亞發布貨物熏蒸證書新規定

關務小二

澳大利亞發布貨物熏蒸證書新規定
近日，澳大利亞農業水利和環境部調整了到港貨物熏蒸新要求：自2021年8月2日起（含）出口到澳大利亞的貨物如需熏蒸處理，應按照澳大利亞針對溴甲烷、硫酰氟熏蒸處理最新要求進行熏蒸處理，并在出具的熏蒸證書中隨附新的附加聲明。為避免對出口貨物造成影響，請竹木草制品等出口植物產品生產企業高度重視該項新要求，確保輸澳貨物熏蒸處理及出證符合澳方要求，避免造成經濟損失。（網址：https://www.agriculture.gov.au/i ... dvice/2021/152-2021）

以下為《152-2021：進口貨物熏蒸證明文件要求》粗略翻譯，僅供參考
152-2021: Documentary requirements for fumigation certificates for imported goods
152-2021: 進口貨物熏蒸證書的單據要求

13 July 2021
二零二一年七月十三日

Who does this notice affect?
這個通知影響到誰？

Clients in the import and shipping industries – including freight forwarders, importers and customs brokers – associated with imported goods and containers.
與進口貨物和集裝箱有關的進口和航運業客戶 -- 包括貨運代理、進口商和報關商。

What has changed?
什么發生了變化？

The Minimum documentary and import declarations requirements policy sets the requirements for documents submitted to the Department of Agriculture, Water and the Environment for assessment of the biosecurity risk of goods imported into Australia. This includes requirements for certification related to treatments conducted in exporting countries to mitigate potential biosecurity risks prior to shipment.
最低文件和進口申報要求政策規定了向農業、水和環境部提交文件以評估進口到澳大利亞的貨物的生物安全風險的要求。這包括要求在出口國進行與處理有關的認證，以便在裝運前減輕潛在的生物安全風險。

As a result of the recently updated Minimum documentary and import declaration requirements policy version 4.0, documentary requirements for fumigation certificates are changing.
由于最近更新的最低文件和進口申報要求政策版本4.0，熏蒸證書的文件要求正在發生變化。

The current policy (version 3.0) differentiates statements required to be made on fumigation certificates with respect to impervious surfaces, wrappings and timber thickness depending on whether the treatment provider issuing the certificate is registered with the Department of Agriculture, Water and the Environment.
現行政策(第3.0版)根據簽發證書的處理提供者是否在農業、水利和環境部登記，對熏蒸證書中關于不透水表面、包裝材料和木材厚度的規定作出區分。

Current Policy (version 3.0) Requirements
現行政策(版本3.0)規定

Treatment providers other than those undertaking a treatment under one of the department’s recognised schemes (AFAS, BMSB) or to address the risk of Khapra Beetle are required to make a statement related to plastic wrapping of the goods only.
除了根據衛生署認可的計劃(AFAS，BMSB)進行治療或處理卡普拉甲蟲風險的治療提供者外，其他治療提供者只須就塑料包裝貨物作出聲明。

The current policy enables one of the following statements to be made:
當前策略允許作出以下聲明之一:

‘plastic wrapping has not been used in this consignment’ 這批貨沒有使用塑料包裝
‘this consignment has been fumigated before application of plastic wrapping’ 這批貨在使用塑料包裝之前已經熏蒸過了
‘plastic wrapping used in this consignment conforms to the AFAS wrapping and perforation standard as found in the AFAS Methyl Bromide Fumigation Standard’. 這批貨物使用的塑料包裝符合 AFAS 甲基溴熏蒸標準中的 AFAS 包裝和穿孔標準

Revised Policy (version 4.0) Requirements
經修訂的政策(版本4.0)規定

The revised policy which comes into effect 2 August 2021 enables a single statement to be used on all methyl bromide and sulfuryl fluoride certificates regardless of the treatment provider.
經修訂的政策于2021年8月2日生效，使所有甲基溴和硫酰氟證書都能使用單一說明，而不論處理供應商為何。

The revised requirement is:
經修訂的規定如下:

A statement confirming that the target of the fumigation conforms to the plastic wrapping, impervious surface and timber thickness requirements at the time of fumigation, as per Appendix 3 of the Methyl Bromide Fumigation Methodology. 根據甲基溴熏蒸方法的附錄3，確認熏蒸的目標符合熏蒸時對塑料包裝、非滲透表面和木材厚度的要求

Or
或者

A statement confirming that the target of the fumigation conforms to the plastic wrapping, impervious surface and timber thickness requirements at the time of fumigation, as per Appendix 2a of the Sulfuryl Fluoride Fumigation Methodology 根據硫酰氟熏蒸方法的附錄2 a，確認熏蒸目標符合熏蒸時對塑料包裝、非滲透表面和木材厚度的要求

Reason for the change
改變的原因

The primary reason for this change is that the current statements do not address timber thickness and impervious coating considerations that must be taken into account to ensure effective fumigations are conducted. The new policy harmonises the requirement between providers and removes opportunity for conflicting statements to be made.
造成這一變化的主要原因是，目前的說明沒有提到木材厚度和防滲層的考慮因素，而這些因素必須加以考慮，以確保進行有效的熏蒸。新政策協調了供應商之間的要求，消除了作出相互沖突的陳述的機會。

Action for industry participants
行業參與者的行動
AFAS, BMSB and Khapra Beetle fumigations
AFAS、 BMSB 和卡普拉甲蟲熏蒸
No action is required for goods that are fumigated prior to export to Australia under the Australian Fumigation Accreditation Scheme (AFAS), the Offshore Brown Marmorated Stink Bug (BMSB) Treatment Providers Scheme or for any consignments fumigated for the risk of Khapra Beetle.
根據澳大利亞熏蒸認證計劃(AFAS)、海上九香蟲處理提供商計劃(BMSB)或任何為卡普拉甲蟲風險而熏蒸的貨物，在出口到澳大利亞之前進行熏蒸的貨物不需要采取行動。

Providers fumigating these goods are already required to make a statement confirming that the target of the fumigation conforms to the plastic wrapping, impervious surface and timber thickness requirements at the time of fumigation, as per Appendix 3 of the Methyl Bromide Fumigation Methodology.
按照甲基溴熏蒸方法的附錄3，熏蒸這些貨物的供應商已被要求作出聲明，確認熏蒸的目標符合熏蒸時對塑料包裝、非滲透表面和木材厚度的要求。

All other offshore fumigations
所有其他海上熏蒸

For all other goods that require fumigation prior to shipment and are exported to Australia on or after 2 August 2021, importers and their agents are encouraged to ensure that treatment providers are aware of the new requirement.
對于2021年8月2日或之后出口到澳大利亞、在裝運前需要熏蒸的所有其他貨物，鼓勵進口商及其代理人確保處理提供商了解新的要求。

Templates that include the required statement are available on our Methodologies and documents for biosecurity treatments and Acceptable documentation templates webpages.
包含所需聲明的模板可在我們的生物安全治療方法學和文件以及可接受文件模板網頁上找到。

Compliance with the new requirement
符合新規定

For some goods, import conditions stipulated in BICON mandate treatment within a specific timeframe prior to export of the goods to Australia. Where the fumigation has been completed and the certificate has been issued within the specified timeframe and before 2 August 2021, the existing plastic wrapping declarations will be considered acceptable. This includes manufactured wooden articles that are accompanied by a storage declaration. Relevant BICON cases will be updated to clarify this requirement.
對于一些貨物，BICON 規定的進口條件要求在出口到澳大利亞之前的特定時間內進行處理。如在指定時限內及在2021年8月2日前完成熏蒸及簽發證明書，現有的塑膠包裝聲明將被視為可接受。這包括附有儲存聲明的制造木制品。我們會更新有關的 BICON 個案，以澄清這項規定。

All other goods fumigated and exported to Australia after 2 August 2021 that arrive with a fumigation certificate that does not bear the new statement will be subject to inspection or treatment on arrival if amended documentation cannot be obtained.
在2021年8月2日之后，所有其他貨物如果攜帶不附有新說明的熏蒸證明書到達澳大利亞，如果無法獲得經修訂的文件，將在到達時接受檢查或處理。

Further information
進一步資料

For further information regarding the revised Minimum documentary and import declarations requirements policy, please visit the department’s website or email [email protected].
有關經修訂的最低文件及進口申報規定政策的進一步資料，請瀏覽本署網頁或電郵至 [email protected]。

來源：關務小二整理自青島海關。