美國延長429項對華產品301關稅排除期限（有效期至2024.5.31）

關務小二

美國USTR宣布延長部分對華301關稅排除期限

美國時間2023年12月26日，美國貿易代表辦公室(USTR)宣布將原定于2023年12月31日到期的對華352項排除加征產品(排除標識代碼9903.88.67)及77項應對COVID-19排除加征產品(排除標識代碼9903.88.68)繼續延長豁免加征關稅5個月，即429項產品排除加征關稅有效期至2024年5月31日，自2024年1月1日起生效。

此外，美國貿易代表辦公室還將在2024年1月22日至2024年2月21日期間開放一份評論，用于接受公眾對是否將上述特定排除條款進一步延長至2024年5月31日之后進行意見反饋。
后續評論開放網址http://comments.ustr.gov/


中美關稅雙向查詢系統：http://ljiljak.com/taxes.php


排除加征清單（中英文對照參考）
（一）排除標識代碼9903.88.68該排除標識代碼下有77項排除產品，清單如下：
903.88.68 and U.S. notes 20(uuu)(i) 20(uuu)(ii) 20(uuu)(iii) 20(uuu)(iv)

(uuu) (i) The U.S. Trade Representative determined to establish a process by which particular products classified in heading 9903.88.01 and provided for in U.S. notes 20(a) and 20(b) to this subchapter could be excluded from the additional duties imposed by heading 9903.88.01. See 83 Fed. Reg. 40823 (August 16, 2018) and 83 Fed. Reg. 47326 (September 18, 2018). Pursuant to the product exclusion process, the U.S. Trade Representative has determined that, as provided in heading 9903.88.68, the additional duties provided for in heading 9903.88.01 shall not apply to the following particular products, which are provided for in the enumerated statistical reporting numbers:
(uuu)(i)美國貿易代表決定制定一個程序，通過該程序，可將分類在第9903.88.01品目和本分章美國注釋20(a)和20(b)中規定的特定產品排除在第99038.8.01品目的附加關稅之外。參見83 Fed.Reg.40823(2018年8月16日)和83 Fed.Reg.47326(2018年9月18日)。根據產品排除程序，美國貿易代表已確定，根據第9903.88.68類的規定，第9903.88.01類規定的額外關稅不適用于列舉的統計報告數字中規定的以下特定產品：
(1) Disposable plastic filters of a kind suitable for filtering and dehumidifying a patient's breath in a medical device such as a gas analyzer (described in statistical reporting number 8421.39.0190)
(1) 一種適用于在醫療設備(如氣體分析儀)中過濾和除濕患者呼吸的一次性塑料過濾器(在統計報告編號8421.39.0190中描述)
(2) S-band and X-band linear accelerators designed for use in radiation surgery or radiation therapy equipment (described in statistical reporting number 8543.10.0000)
(2) 設計用于放射外科或放射治療設備的S波段和X波段線性加速器(如統計報告編號8543.10.0000所述)
(3) Disposable electrocardiograph (ECG) electrodes (described in statistical reporting number 9018.11.9000)
(3) 一次性心電圖(ECG)電極(統計報告編號9018.11.9000中描述)
(4) Ultrasonic scanning apparatus, each having dimensions not exceeding 122 cm by 77 cm by 127 cm, whether or not presented with transducer (described in statistical reporting number 9018.12.0000)
(4) 超聲波掃描設備，每個尺寸不超過122 cm×77 cm×127 cm，無論是否配備換能器(統計報告編號9018.12.0000中描述)
(5) Blood pressure monitors suitable for use by medical professionals (described in statistical reporting number 9018.19.9530)
(5) 適合醫療專業人員使用的血壓計(如統計報告編號9018.19.9530所述)
(6) Digital peak flow meters suitable for use by medical professionals (described in statistical reporting number 9018.19.9550)
(6) 適合醫療專業人員使用的數字峰值流量計(如統計報告編號9018.19.9550所述)
(7) Fingertip pulse oximeters suitable for use by medical professionals (described in statistical reporting number 9018.19.9550)
(7) 適用于醫療專業人員的指尖脈搏血氧儀(如統計報告編號9018.19.9550所述)
(8) Bismuth germanate crystals with set dimensional and surface finish requirements and used as a detection element in Positron Emission Tomography (PET) detectors (described in statistical reporting number 9018.19.9560)
(8) 鍺酸鉍晶體，具有一定的尺寸和表面光潔度要求，用作正電子發射斷層掃描(PET)探測器的檢測元件(統計報告編號9018.19.9560中描述)
(9) Magnetic resonance imaging ("MRI") patient enclosure devices, each incorporating radio frequency and gradient coils (described in statistical reporting number 9018.19.9560)
(9) 磁共振成像(“MRI”)患者外殼設備，每個設備都包含射頻和梯度線圈(如統計報告編號9018.19.9560所述)
(10) Parts and accessories of capnography monitors (described in statistical reporting number 9018.19.9560)
(10) 二氧化碳監測儀的零件和附件(統計報告編號9018.19.9560中描述)
(11) Disposable surface electrodes for Intra-operative neuromonitoring ("IONM") systems, each composed of a surface electrode pad, an insulated wire, and a standard DIN 42802 connector (described in statistical reporting number 9018.19.9560)
(11) 用于術中神經監測(“IONM”)系統的一次性表面電極，每個電極由表面電極墊、絕緣導線和標準DIN 42802連接器組成(在統計報告編號9018.19.9560中描述)
(12) Otoscopes (described in statistical reporting number 9018.90.2000)
(12) 耳表(統計報告編號9018.90.2000中描述)
(13) Anesthesia masks (described in statistical reporting number 9018.90.3000)
(13) 麻醉面罩(統計報告編號9018.90.3000中描述)
(14) Anesthetic instruments and appliances suitable for use in medical or surgical sciences, and parts and accessories of the foregoing (described in statistical reporting number 9018.90.3000)
(14) 適用于醫學或外科的麻醉儀器和器具，以及上述部件和配件(統計報告編號9018.90.3000中描述)
(15) Electrosurgical cautery pencils with electrical connectors (described in statistical reporting number 9018.90.6000)
(15) 帶電連接器的電外科燒灼筆(統計報告編號9018.90.6000中描述)
(16) Printed circuit board assemblies designed for use in displaying operational performance of medical infusion equipment (described in statistical reporting number 9018.90.7580)
(16) 設計用于顯示醫用輸液設備操作性能的印刷電路板組件(在統計報告編號9018.90.7580中描述)
(17) Combined positron emission tomography/computed tomography (PET/CT) scanners which utilize multiple PET gantries (frames) on a common base (described in statistical reporting number 9022.12.0000)
(17) 組合式正電子發射斷層掃描/計算機斷層掃描(PET/CT)掃描儀，在公共基礎上使用多個PET龍門架(框架)(在統計報告編號9022.12.0000中描述)
(18) X-ray tables (described in statistical reporting number 9022.90.2500)
(18) X射線表(統計報告編號9022.90.2500中描述)
(19) X-ray tube housings and parts thereof (described in statistical reporting number 9022.90.4000)
(19) X射線管外殼及其零件(統計報告編號9022.90.4000中描述)
(20) Multi-leaf collimators of radiotherapy systems based on the use of X-ray (described in statistical reporting number 9022.90.6000)
(20) 基于X射線使用的放射治療系統的多葉準直器(在統計報告編號9022.90.6000中描述)
(21) Parts and accessories, of metal, for mobile X-ray apparatus (described in statistical reporting number 9022.90.6000)
(21)移動X射線設備用金屬零件和附件(統計報告編號9022.90.6000中所述)
(22) Vertical stands specially designed to support, contain or adjust the movement of X-ray digital detectors, or the X-ray tube and collimator in complete X-ray diagnostic systems (described in statistical reporting number 9022.90.6000)
(22)專門設計用于支撐、容納或調整X射線數字探測器或完整X射線診斷系統中的X射線管和準直器的移動的垂直支架(如統計報告編號9022.90.6000所述)
(23) Thermoplastic masks of polycaprolactone for the use of immobilizing patients, during the use of alpha, beta or gamma radiations, for radiography or radiotherapy (described in statistical reporting number 9022.90.9500)
(23)聚己內酯熱塑性口罩，用于固定患者，在使用α、β或γ輻射期間，用于射線照相或放射治療(在統計報告編號9022.90.9500中描述)
(24) Inoculator sets of plastics, each consisting of a plate with multiple wells, a display tray, and a lid; when assembled, the set measuring 105 mm or more but not exceeding 108 mm in width, 138 mm or more but not exceeding 140 mm in depth, and 6.5 mm or less in thickness (described in statistical reporting number 9027.90.5650)
(24)塑料接種器組，每個接種器組由具有多個孔的板、展示托盤和蓋組成；組裝時，寬度為105 mm或以上但不超過108 mm，深度為138 mm或以上，但不超過140 mm，厚度為6.5 mm或以下的組件(如統計報告編號9027.90.5650所述)
(ii) The U.S. Trade Representative determined to establish a process by which particular products classified in heading 9903.88.02 and provided for in U.S. notes 20(c) and 20(d) to this subchapter could be excluded from the additional duties imposed by heading 9903.88.02. See 83 Fed. Reg. 40823 (August 16, 2018) and 83 Fed. Reg. 47326 (September 18, 2018). Pursuant to the product exclusion process, the U.S. Trade Representative has determined that, as provided in heading 9903.88.68, the additional duties provided for in heading 9903.88.02 shall not apply to the following particular products, which are provided for in the enumerated statistical reporting numbers:
(ii)美國貿易代表決定制定一個程序，通過該程序，可將分類在第9903.88.02類中并在本分章美國注釋20(c)和20(d)中規定的特定產品排除在第99038.8.02類規定的額外關稅之外。參見83 Fed.Reg.40823(2018年8月16日)和83 Fed.Reg.47326(2018年9月18日)。根據產品排除程序，美國貿易代表已確定，根據第9903.88.68類的規定，第9903.88.02類規定的額外關稅不適用于列舉的統計報告數字中規定的以下特定產品：
(1) 9025.19.8010
(2) 9025.19.8020
(3) 9025.19.8060
(4) 9025.19.8085
(5) Molded acrylonitrile-butadiene-styrene (ABS) tubes, of a kind used to effect the sterile transfer of fluid from a bag or vial to another container, each tube measuring 7.5 cm or more but not exceeding 23 cm in length, with an inner diameter of less than 0.65 cm and an outer diameter of less than 9 cm, one end having been angle-cut to form a spike, and having an integrated flange, less than 3 cm in diameter (splash guard) near the spike end and removable polyethylene caps on each end, put up in sterile packing (described in statistical reporting number 3917.29.0090)
(5) 模壓丙烯腈-丁二烯-苯乙烯(ABS)管，用于將流體從袋子或小瓶無菌轉移到另一個容器，每根管長7.5厘米或更大，但不超過23厘米，內徑小于0.65厘米，外徑小于9厘米，一端被斜切形成釘狀物，在釘狀物端部附近有一個直徑小于3厘米的集成法蘭(防濺板)，兩端有可拆卸的聚乙烯帽，置于無菌包裝中(如統計報告編號3917.29.0090所述)
(6) Rectangular sheets of high-density or low-density polyethylene, 111.75 cm to 215.9 cm in width, and 152.4 cm to 304.8 cm in length, with a sticker attached to mark the center of each sheet, of a kind used in hospital or surgery center operating rooms (described in statistical reporting number 3920.10.0000)
(6) 醫院或手術中心手術室使用的高密度或低密度聚乙烯矩形片材，寬度111.75 cm至215.9 cm，長度152.4 cm至304.8 cm，并在每張片材的中心貼上標簽(統計報告編號3920.10.0000中描述)
(7) Sheets and strips consisting of both cross-linked polyethylene and ethylene vinyl acetate, of a width greater than 1 m but not greater than 1.5 m, and a length greater than 1.75 m but not greater than 2.6 m (described in statistical reporting number 3921.19.0000)
(7) 由交聯聚乙烯和乙烯醋酸乙烯酯組成的片材和條帶，寬度大于1m但不大于1.5m，長度大于1.75m但不大于2.6m(統計報告編號3921.19.0000中描述)
(8) Polyethylene sheet and film laminated with spunbond-spunbond-spunbond nonwoven polypropylene fabric, measuring 1.12 m or more but not over 1.52 m in width and 1.93 m or more but not over 2.29 m in length, and weighing 55 g/m2 or more but not exceeding 88 g/m2 (described in statistical reporting number 3921.90.1500)
(8) 與紡粘-紡粘-非織造聚丙烯織物層壓的聚乙烯片材和薄膜，寬度為1.12 m或以上但不超過1.52 m，長度為1.93 m或以上，但不超過2.29 m，重量為55 g/m2或以上但未超過88 g/m2(統計報告編號3921.90.1500中描述)
(9) Dispensers of hand-cleaning or hand-sanitizing solutions, whether employing a manual pump or a proximity-detecting battery-operated pump, each article weighing not more than 3 kg (described in statistical reporting number 8424.89.9000)
(9) 手部清潔或手部消毒溶液分配器，無論是使用手動泵還是接近檢測電池操作泵，每件物品重量不超過3公斤(統計報告編號8424.89.9000中描述)
(iii) The U.S. Trade Representative determined to establish a process by which particular products classified in heading 9903.88.03 and provided for in U.S. notes 20(e) and 20(f) to this subchapter could be excluded from the additional duties imposed by heading 9903.88.03, and by which particular products classified in heading 9903.88.04 and provided for in U.S. note 20(g) to this subchapter could be excluded from the additional duties imposed by heading 9903.88.04. See 83 Fed. Reg. 47974 (September 21, 2018) and 84 Fed. Reg. 29576 (June 24, 2019). Pursuant to the product exclusion process, the U.S. Trade Representative has determined that, as provided in heading 9903.88.68, the additional duties provided for in heading 9903.88.03 or in heading 9903.88.04 shall not apply to the following particular products, which are provided for in the enumerated statistical reporting numbers:
(iii)美國貿易代表決定制定一個程序，通過該程序，可將分類在第9903.88.03類中并在本分章美國注釋20(e)和20(f)中規定的特定產品排除在第99038.8.03類規定的額外關稅之外，根據該規定，分類在第9903.88.04類和本分章美國注釋20(g)中規定的特定產品可被排除在第99038.8.04類規定的額外關稅之外。參見《聯邦法規》第83卷第47974頁(2018年9月21日)和《聯邦法規條例》第84卷第29576頁(2019年6月24日)。根據產品排除程序，美國貿易代表已確定，根據第9903.88.68類的規定，第9903.88.03類或第9903.88.0 4類規定的額外關稅不適用于列舉的統計報告編號中規定的以下特定產品：
(1) 3808.94.1000
(2) 3808.94.5010
(3) 3926.20.9050
(4) 4819.50.4060
(5) 5603.12.0090 prior to July 1, 2022; 5603.12.0070 or 5603.12.0095 effective July 1, 2022
(5) 5603.12.0090，2022年7月1日之前；5603.12.0070或5603.12.0095，自2022年7月1日起生效
(6) 5603.92.0090 prior to July 1, 2022; 5603.92.0070 or 5603.92.0095 effective July 1, 2022
(6) 5603.92.0090，2022年7月1日之前；5603.92.0070或5603.92.0095于2022年7月1日生效
(7) 5603.93.0090
(8) 6505.00.8015
(9) 8424.90.9080
(10) Sodium metal (CAS No. 7440-23-5), in bulk solid form (described in statistical reporting number 2805.11.0000)
(10) 金屬鈉(CAS第7440-23-5號)，散裝固體形式(統計報告編號2805.11.0000中描述)
(11) Disposable cloths of nonwoven textile materials impregnated, coated or covered with organic surface-active preparations for washing the skin, put up for retail sale (described in statistical reporting number 3401.11.5000)
(11) 零售用浸漬、涂覆或覆蓋有有機表面活性制劑的非織造織物材料制成的一次性布，用于清洗皮膚(統計報告編號3401.115000中描述)
(12) Mixtures containing 2-(dimethylamino)ethanol (CAS No. 108-01-0) (described in statistical reporting number 3824.99.9397)
(12) 含有2-(二甲基氨基)乙醇的混合物(CAS編號108-01-0)(在統計報告編號3824.99.9397中描述)
(13) Silicon monoxide (SiO) (CAS No. 10097-28-6) in powder form (described in statistical reporting number 3824.99.9397)
(13) 粉末形式的一氧化硅(SiO)(CAS第10097-28-6號)(在統計報告編號3824.99.9397中描述)
(14) Flexible gas sampling tubes, pipes and hoses, of polyvinyl chloride, with lock connectors at each end (described in statistical reporting number 3917.33.0000)
(14) 聚氯乙烯制柔性氣體取樣管、管道和軟管，兩端帶鎖緊連接器(統計報告編號3917.33.0000中描述)
(15) Flexible oxygen tubes, pipes and hoses presented with integrated molded connectors, of polyvinyl chloride (described in statistical reporting number 3917.33.0000)
(15) 聚氯乙烯制柔性氧氣管、管道和軟管，帶有集成模制連接器(統計報告編號3917.33.0000中描述)
(16) Container units of plastics, each comprising a tub and lid therefore, configured or fitted for the conveyance, packing, or dispensing of wet wipes (described in statistical reporting number 3923.10.9000)
(16) 塑料容器單元，每個都包括一個桶和蓋子，因此配置或安裝用于濕巾的運輸、包裝或分配(統計報告編號3923.10.9000中描述)
(17) Sacks and bags of polymers of ethylene, reclosable, qualifying as Class 1 medical devices by the U.S. Food and Drug Administration under product code NNI (described in statistical reporting number 3923.21.0030)
(17) 可重新封閉的乙烯聚合物袋和袋，符合美國食品和藥物管理局根據產品代碼NNI規定的1類醫療器械的資格(統計報告編號3923.21.0030中描述)
(18) Injection molded polypropylene plastic caps or lids each weighing not over 24 grams designed for dispensing wet wipes (described in statistical reporting number 3923.50.0000)
(18) 注塑聚丙烯塑料帽或蓋，每個重量不超過24克，設計用于分配濕巾(統計報告編號3923.50.0000中描述)
(19) Hand pumps (other than for fuel or lubricants, not fitted or designed to be fitted with a metering device), each used to dispense a metered quantity of liquid soap or sanitizer (described in statistical reporting number 8413.20.0000)
(19) 手動泵(燃料或潤滑油除外，未安裝或設計為安裝計量裝置)，每個用于分配計量量的液體肥皂或消毒液(統計報告編號8413.20.0000中描述)
(20) Hand pumps for liquids (other than those of subheading 8413.11 or 8413.19) of acrylonitrile butadiene styrene (ABS) plastics (described in statistical reporting number 8413.20.0000)
(20) 丙烯腈-丁二烯-苯乙烯(ABS)塑料液體(第8413.11或8413.19子目除外)用手動泵(統計報告編號8413.20.0000中描述)
(21) Indicator panels incorporating LEDs, designed for use in medical infusion equipment (described in statistical reporting number 8531.20.0040)
(21)包含LED的指示板，設計用于醫療輸液設備(如統計報告編號8531.20.0040所述)
(22) Data input devices each with display capabilities of a kind used for magnetic resonance imaging (?MRI?) equipment, computed tomography (?CT?) equipment, intraoperative X-ray (?IXR?) equipment or patient monitors (described in statistical reporting number 8537.10.9170)
(22)數據輸入設備，每個設備都具有顯示功能，用于磁共振成像(MRI)設備、計算機斷層掃描(CT)設備、術中X射線(IXR)設備或患者監護儀(如統計報告編號8537.10.9170所述)
(23) Compound binocular optical microscopes (other than stereoscopic microscopes and microscopes for photomicrography, cinemicrography or microprojection), each with magnification of 40X or more but not exceeding 1,000X, weighing not more than 3 kg (described in statistical reporting number 9011.80.0000)
(23)復合雙目光學顯微鏡(立體顯微鏡和用于顯微照相、電影顯微照相或顯微投影的顯微鏡除外)，每臺顯微鏡的放大倍數為40倍或以上，但不超過1000倍，重量不超過3公斤(統計報告編號9011.80.0000中描述)
(24) Compound optical microscopes (other than stereoscopic microscopes and microscopes for photomicrography, cinemicrography or microprojection), each with magnification of 40X or more but not exceeding 400X, weighing not more than 15 kg (described in statistical reporting number 9011.80.0000)
(24)復合光學顯微鏡(立體顯微鏡和顯微照片、電影顯微照片或顯微投影顯微鏡除外)，每臺顯微鏡的放大倍數為40倍或以上，但不超過400倍，重量不超過15 kg(統計報告編號9011.80.0000中描述)
(iv) The U.S. Trade Representative determined to establish a process by which particular products classified in heading 9903.88.15 and provided for in U.S. notes 20(r) and (s) to this subchapter could be excluded from the additional duties imposed by heading 9903.88.15. See 84 Fed. Reg. 43304 (August 20, 2019), 84 Fed. Reg. 45821 (August 30, 2019), 84 Fed. Reg. 57144 (October 24, 2019) and 85 Fed. Reg. 3741 (January 22, 2020). Pursuant to the product exclusion process, the U.S. Trade Representative has determined that, as provided in heading 9903.88.68, the additional duties provided for in heading 9903.88.15 shall not apply to the following particular products, which are provided for in the following enumerated statistical reporting numbers:
(iv)美國貿易代表決定制定一個程序，通過該程序，可將第9903.88.15品目中分類的、本分章美國注釋20(r)和(S)中規定的特定產品排除在第9903.88.1品目規定的額外關稅之外。參見84 Fed.Reg.43304(2019年8月20日)、84 Fed.Reg.45821(2019年八月30日)、84Fed.Reg 57144(2019年10月24日)和85Fed.Reg.3741(2020年1月22日)。根據產品排除程序，美國貿易代表已確定，根據第9903.88.68項的規定，第9903.88.15項規定的額外關稅不適用于以下列舉的統計報告數字中規定的以下特定產品：
(1) 3401.19.0000
(2) 3926.90.9910
(3) 5210.11.4040
(4) 5210.11.6020
(5) 5504.10.0000
(6) 6210.10.5010
(7) 6210.10.5090
(8) 6307.90.7200
(9) Face shields of transparent plastics, whether or not assembled (described in statistical reporting number 3926.90.9950)
(9) 透明塑料面罩，無論是否組裝(統計報告編號3926.90.9950中描述)
(10) Bowls of molded plastics, with clips for retaining guide wires during surgical procedures (described in statistical reporting number 3926.90.9990 prior to July 1, 2020; described in statistical reporting number 3926.90.9985 effective July 1, 2020)
(10) 模制塑料碗，帶有用于在手術過程中固定導絲的夾子(在2020年7月1日之前的統計報告編號3926.90.9990中描述；在2020年七月1日生效的統計報告號3926.90.9985中描述)
(11) Coverings, of plastics, designed to fit over wound sites or casts thereby forming a protective seal for keeping the covered area dry and debris free while showering or bathing (described in statistical reporting number 3926.90.9990 prior to July 1, 2020; described in statistical reporting number 3926.90.9985 effective July 1, 2020)
(11) 塑料覆蓋物，設計用于覆蓋傷口部位或鑄件，從而形成保護性密封，以在淋浴或洗澡時保持覆蓋區域干燥和無碎屑(2020年7月1日之前的統計報告編號3926.90.9990中描述；2020年7日1日生效的統計報告號3926.90.9985中描述)
(12) Disposable graduated medicine dispensing cups of plastics (described in statistical reporting number 3926.90.9990 prior to July 1, 2020; described in statistical reporting number 3926.90.9985 effective July 1, 2020)
(12) 一次性刻度塑料配藥杯(2020年7月1日之前的統計報告編號3926.90.9990中描述；2020年7日1日生效的統計報告號3926.90.9985中描述)
(13) Single-use sterile drapes and covers of plastics, of a kind used to protect the sterile field in surgical operating rooms (described in statistical reporting number 3926.90.9990 prior to July 1, 2020; described in statistical reporting number 3926.90.9985 effective July 1, 2020)
(13) 一次性無菌塑料窗簾和覆蓋物，用于保護外科手術室的無菌區域(2020年7月1日之前的統計報告編號3926.90.9990中描述；2020年7日1日生效的統計報告號3926.90.9985中描述)
(14) Sterile decanters of polystyrene plastics, each of a kind used to transfer aseptic fluids or medication to and from sterile bags, vials or glass containers (described in statistical reporting number 3926.90.9990 prior to July 1, 2020; described in statistical reporting number 3926.90.9985 effective July 1, 2020)
(14) 聚苯乙烯塑料無菌潷析器，每種用于將無菌液體或藥物轉移到無菌袋、小瓶或玻璃容器中或從無菌袋、西林瓶或玻璃容器轉移無菌液體或藥品(2020年7月1日之前的統計報告編號3926.90.9990中有描述；2020年7日1日生效的統計報告號3926.90.9985中有描述)
(15) Cold packs consisting of a single-use, instant, endothermic chemical reaction cold pack combined with a textile exterior lining (described in statistical reporting number 6307.90.9889 prior to July 1, 2020; described in statistical reporting number 6307.90.9891 effective July 1, 2020)
(15) 冷包由一次性、即時、吸熱化學反應冷包與織物外層襯里組成(2020年7月1日之前的統計報告編號6307.90.9889中有描述；2020年7月份1日生效的統計報告號6307.90.9891中有說明)
(16) Hot packs of textile material, single-use (exothermic chemical reaction) (described in statistical reporting number 6307.90.9889 prior to July 1, 2020; described in statistical reporting number 6307.90.9891 effective July 1, 2020)
(16) 一次性(放熱化學反應)紡織材料熱包裝(2020年7月1日之前的統計報告編號6307.90.9889中描述；2020年7日1日生效的統計報告號6307.90.9891中描述)
(17) Laparotomy sponges of cotton (described in statistical reporting number 6307.90.9889 prior to July 1, 2020; described in statistical reporting number 6307.90.9891 effective July 1, 2020)
(17) 棉花剖腹產海綿(在2020年7月1日之前的統計報告編號6307.90.9889中描述；在2020年七月1日生效的統計報告號6307.90.9891中描述)
(18) Single-use blood pressure cuff sleeves of textile materials (described in statistical reporting number 6307.90.9889 prior to July 1, 2020; described in statistical reporting number 6307.90.9891 effective July 1, 2020)
(18) 紡織材料的一次性血壓袖套(2020年7月1日之前的統計報告編號6307.90.9889中描述；2020年7日1日生效的統計報告號6307.90.9891中描述)
(19) Single-use stethoscope covers (described in statistical reporting number 6307.90.9889 prior to July 1, 2020; described in statistical reporting number 6307.90.9891 effective July 1, 2020)
(19) 一次性聽診器覆蓋范圍(在2020年7月1日之前的統計報告編號6307.90.9889中描述；在2020年七月1日生效的統計報告號6307.90.9891中描述)
(20) Woven gauze sponges of cotton in square or rectangular sizes (described in statistical reporting number 6307.90.9889 prior to July 1, 2020; described in statistical reporting number 6307.90.9891 effective July 1, 2020)
(20) 方形或矩形尺寸的棉編織紗布海綿(2020年7月1日之前的統計報告編號6307.90.9889中有說明；2020年7日1日生效的統計報告號6307.90.9891中有介紹)


（二）排除標識代碼9903.88.67該排除標識代碼下有352項排除產品，清單如下：
9903.88.67 and U.S. notes 20(ttt)(i)、20(ttt)(ii)、20(ttt)(iii)、20(ttt)(iv)

(ttt) (i) The U.S. Trade Representative determined to establish a process by which particular products classified in heading 9903.88.01 and provided for in U.S. notes 20(a) and 20(b) to this subchapter could be excluded from the additional duties imposed by heading 9903.88.01. See 83 Fed. Reg. 40823 (August 16, 2018) and 83 Fed. Reg. 47326 (September 18, 2018). Pursuant to the product exclusion process, the U.S. Trade Representative has determined that, as provided in heading 9903.88.67, the additional duties provided for in heading 9903.88.01 shall not apply to the following particular products, which are provided for in the enumerated statistical reporting numbers:
(ttt)(i)美國貿易代表決定制定一個程序，通過該程序，可將分類在第9903.88.01品目和本分章美國注釋20(a)和20(b)中規定的特定產品排除在第99038.8.01品目的附加關稅之外。參見83 Fed.Reg.40823(2018年8月16日)和83 Fed.Reg.47326(2018年9月18日)。根據產品排除程序，美國貿易代表已確定，根據第9903.88.67類的規定，第9903.88.01類規定的額外關稅不適用于列舉的統計報告數字中規定的以下特定產品：
(1) 8412.21.0045
(2) 8481.10.0090
(3) 8483.50.9040
(4) 8525.60.1010
(5) 8607.21.1000
(6) 9030.90.4600
(7) Direct acting and spring return pneumatic actuators, each rated at a maximum pressure of 10 bar and valued over $68 but not over $72 per unit (described in statistical reporting number 8412.39.0080)
(7) 直接作用式和氣動執行機構和彈簧復位式氣動執行機構，每臺額定最大壓力為10巴，每臺價值超過68美元但不超過72美元(如統計報告編號8412.39.0080所述)
(8) Centrifugal pumps, submersible, other than for use with machines for making cellulosic pulp, paper or paperboard; the foregoing pumps rated not over 1.5 KW (described in statistical reporting number 8413.70.2004)
(8) 離心泵，潛水式，與制造纖維素紙漿、紙張或紙板的機器一起使用的除外；上述額定功率不超過1.5 KW的泵(統計報告編號8413.70.2004中描述)
(9) Breast pumps, whether or not with accessories or batteries (described in statistical reporting number 8413.81.0040)
(9) 吸奶器，無論是否配有附件或電池(統計報告編號8413.81.0040中描述)
(10) Housings for water pumps of subheading 8413.30.90 (as described in subheading 8413.91.9010)
(10) 第8413.30.90子目的水泵外殼(如第8413.91.9010子目所述)
(11) Pump casings and bodies (described in statistical reporting number 8413.91.9080 prior to January 1, 2019; described in statistical reporting number 8413.91.9095 effective January 1, 2019 through December 31, 2019; described in statistical reporting number 8413.91.9085 or 8413.91.9096 effective January 1, 2020)
(11) 泵殼和泵體(在2019年1月1日之前的統計報告編號8413.91.9080中描述；在2019年01月1日至2019年12月31日的統計報告號碼8413.91.9095中描述，在2020年01月01日生效的統計報告號8413.91.9085或8413.91.9096中描述)
(12) Pump covers (described in statistical reporting number 8413.91.9080 prior to January 1, 2019; described in statistical reporting number 8413.91.9095 effective January 1, 2019 through December 31, 2019; described in statistical reporting number 8413.91.9085 or 8413.91.9096 effective January 1, 2020)
(12) 泵蓋(在2019年1月1日之前的統計報告編號8413.91.9080中描述；在2019年01月1日至2019年12月31日的統計報告號8413.91.9095中描述，在2020年01月01日生效的統計報告號碼8413.91.9085或8413.91.9096中描述)
(13) Pump parts, of plastics, each valued not over $3 (described in statistical reporting number 8413.91.9080 prior to January 1, 2019; described in statistical reporting number 8413.91.9095 effective January 1, 2019 through December 31, 2019; described in statistical reporting number 8413.91.9085 or 8413.91.9096 effective January 1, 2020)
(13) 塑料泵部件，每個價值不超過3美元(在2019年1月1日之前的統計報告編號8413.91.9080中描述；在2019年元月1日至2019年12月31日有效的統計報告號8413.91.9095中描述，在2020年元月一日有效的統計報告編號8413.9 1.9085或8413.91.9096中描述)
(14) Compressors, other than screw type, used in air conditioning equipment in motor vehicles, each valued over $88 but not over $92 per unit (described in statistical reporting number 8414.30.8030)
(14) 用于機動車輛空調設備的螺桿式壓縮機除外，每臺價值超過88美元但不超過92美元(統計報告編號8414.30.8030中描述)
(15) Rotary compressors, each exceeding 746 W but not exceeding 2,238 W, with a cooling capacity ranging from 2.3 kW to 5.5 kW (described in statistical reporting number 8414.30.8060)
(15) 旋轉壓縮機，每臺功率超過746 W，但不超過2238 W，冷卻能力范圍為2.3 kW至5.5 kW(統計報告編號8414.30.8060中描述)
(16) Solar water heaters incorporating glass tube heat collectors and including glass tubes and stands with tanks (described in statistical reporting number 8419.19.0040 prior to January 27, 2022; described in statistical reporting number 8419.12.0000 effective January 27, 2022)
(16) 太陽能熱水器，包括玻璃管集熱器，包括帶水箱的玻璃管和支架(2022年1月27日之前的統計報告編號8419.19.0040中描述；2022年1日27日生效的統計報告號8419.12.0000中描述)
(17) Heat exchanger plates, cores, finned tubes, cones, shells, bonnets, flanges and baffles (described in statistical reporting number 8419.90.3000)
(17) 熱交換器板、芯、翅片管、錐體、殼體、閥蓋、法蘭和擋板(統計報告編號8419.90.3000中描述)
(18) Thermal roll laminators, each valued not over $450 (described in statistical reporting number 8420.10.9040)
(18) 每臺價值不超過450美元的熱輥式層壓機(統計報告編號8420.10.9040中描述)
(19) Roller machines designed for cutting, etching or embossing paper, foil or fabric, manually powered (described in statistical reporting number 8420.10.9080)
(19) 專為切割、蝕刻或壓花紙、箔或織物而設計的手動滾筒機(如統計報告編號8420.10.9080所述)
(20) Roller machines with dies for embossing paper, manually powered (described in statistical reporting number 8420.10.9080)
(20) 帶手動壓花紙模具的輥式機器(如統計報告編號8420.10.9080所述)
(21) Chemically etched dies of steel, steel-rule cutting dies, movable magnetic dies, embossing folders and plastic embossing diffusers, of a kind used in manually-powered roller machines for etching or stenciling a single sheet of cardstock, paper, leather, flexible magnet, plastics, metallic foil, vellum, felt or fabric, such sheets measuring not more than 50.8 cm in width or length (described in statistical reporting number 8420.99.9000)
(21)鋼制化學蝕刻模具、鋼尺切割模具、可移動磁性模具、壓花文件夾和塑料壓花擴散器，屬于手動滾筒機中用于蝕刻或壓印單張卡片、紙張、皮革、柔性磁鐵、塑料、金屬箔、牛皮紙、氈或織物的一種，寬度或長度不超過50.8厘米的此類片材(統計報告編號8420.99.9000中描述)
(22) Cutting pads, platforms, base plates, pads, shims, trays, which function as guides for hand-operated table-top calendering machines of a width not exceeding 51 cm (described in statistical reporting number 8420.99.9000)
(22)切割墊、平臺、基板、墊、墊片、托盤，用作寬度不超過51厘米的手動臺式壓延機的導軌(統計報告編號8420.99.9000中描述)
(23) Filtering or purifying machinery or apparatus of a kind used for waste water treatment (described in statistical reporting number 8421.21.0000)
(23)用于廢水處理的過濾或凈化機械或設備(統計報告編號8421.21.0000中描述)
(24) Hand-held ultraviolet water purifiers, powered by batteries (described in statistical reporting number 8421.21.0000)
(24)手持式紫外線凈水器，由電池供電(統計報告編號8421.21.0000中描述)
(25) Machinery for filtering water, submersible, powered by batteries, manually operated, such machinery designed for use in pools, basins, aquariums, spas or similar contained bodies of water (described in statistical reporting number 8421.21.0000)
(25)手動操作的潛水式過濾水機械，由電池供電，此類機械設計用于水池、水池、水族館、水療中心或類似的含水體(統計報告編號8421.21.0000中描述)
(26) Filters designed to remove sulfites from wine (described in statistical reporting number 8421.22.0000)
(26)設計用于去除葡萄酒中亞硫酸鹽的過濾器(統計報告編號8421.22.0000中描述)
(27) Air purification equipment, electrically powered, weighing less than 36 kg (described in statistical reporting number 8421.39.8015 prior to January 27, 2022; described in statistical reporting number 8421.39.0115 effective January 27, 2022)
(27)重量小于36 kg的電動空氣凈化設備(2022年1月27日之前的統計報告編號8421.39.8015中描述；2022年1日27日生效的統計報告號8421.39.0115中描述)
(28) Filter housings, covers, or couplings, the foregoing of steel and comprising parts of machinery or apparatus for filtering liquids (described in statistical reporting number 8421.99.0040 prior to January 27, 2022; described in statistical reporting number 8421.99.0140 effective January 27, 2022)
(28)過濾器外殼、蓋子或聯軸器，上述鋼制，包括用于過濾液體的機械或設備的部件(2022年1月27日之前的統計報告編號8421.99.0040中描述；2022年1日27日生效的統計報告號8421.99.0140中描述)
(29) Parts of swimming pool vacuum cleaners (described in statistical reporting number 8421.99.0040 prior to January 27, 2022; described in statistical reporting number 8421.99.0140 effective January 27, 2022)
(29)游泳池真空吸塵器的零件(2022年1月27日之前的統計報告編號8421.99.0040中描述；2022年1月份27日生效的統計報告號8421.99.0140中描述)
(30) Ratchet winches designed for use with textile fabric strapping (described in statistical reporting number 8425.39.0100)
(30)設計用于紡織織物捆扎的棘輪絞車(如統計報告編號8425.39.0100所述)
(31) Garage door opener/closers (described in statistical reporting number 8428.90.0290 prior to January 27, 2022; described in statistical reporting number 8428.90.0390 effective January 27, 2022)
(31)車庫門開啟器/關閉器(在2022年1月27日之前的統計報告編號8428.90.0290中描述；在2022年元月27日生效的統計報告號8428.90.0390中描述)
(32) Pile drivers, diesel powered (described in statistical reporting number 8430.10.0000)
(32)柴油動力打樁機(如統計報告編號8430.10.0000所述)
(33) Counterweight castings of iron or steel designed for use on fork lift and other works trucks (described in statistical reporting number 8431.20.0000)
(33)設計用于叉車和其他工程卡車的鐵或鋼配重鑄件(如統計報告編號8431.20.0000所述)
(34) Tines, carriages, and other goods handling apparatus and parts designed for use on fork lift and other works trucks (described in statistical reporting number 8431.20.0000)
(34)設計用于叉車和其他工程卡車的馬口鐵、車廂和其他貨物裝卸設備和零件(統計報告編號8431.20.0000中描述)
(35) Welded frames designed to support conveyor rollers (described in statistical reporting number 8431.39.0010)
(35)設計用于支撐輸送輥的焊接框架(如統計報告編號8431.39.0010所述)
(36) Vulcanized rubber tracks, each incorporating cords and cleats of steel, designed for use on construction equipment (described in statistical reporting number 8431.49.9095)
(36)硫化橡膠軌道，每個軌道包括鋼制繩索和防滑釘，設計用于施工設備(統計報告編號8431.49.9095中描述)
(37) Animal feeding machinery (described in statistical reporting number 8436.80.0090)
(37)動物飼養機械(統計報告編號8436.80.0090)
(38) Parts of animal feeding machinery (described in statistical reporting number 8436.99.0090)
(38)動物飼養機械零件(統計報告編號8436.99.0090中描述)
(39) Automated data processing storage units (other than magnetic disk drive units), not assembled in cabinets for placing on a table or similar place, not presented with any other unit of a system (described in statistical reporting number 8471.70.6000)
(39)自動化數據處理存儲單元(磁盤驅動器單元除外)，未組裝在機柜中以放置在桌子或類似位置，未與系統的任何其他單元一起提供(統計報告編號8471.70.6000中描述)
(40) Reject doors, pin protectors, liners, front walls, grates, hammers, rotor and end disc caps, and anvil and breaker bars, of iron or steel, the foregoing parts of metal shredders (described in statistical reporting number 8479.90.9496 prior to January 27, 2022; described in statistical reporting number 8479.90.9596 effective January 27, 2022)
(40)拒收鐵或鋼制門、銷保護器、襯墊、前壁、格柵、錘子、轉子和端盤蓋以及鐵砧和破碎棒，以及金屬粉碎機的上述部件(2022年1月27日之前的統計報告編號8479.90.9496中有描述；2022年1日27日生效的統計報告號8479.90.9596中有描述)
(41) Ball type angle cock valve bodies, of cast iron, for oleohydraulic or pneumatic transmissions (described in statistical reporting number 8481.90.9020)
(41)用于液壓或氣動傳動的鑄鐵球形角旋塞閥體(如統計報告編號8481.90.9020所述)
(42) Valve bodies, of aluminum, of valves for oleohydraulic or pneumatic transmissions (described in statistical reporting number 8481.90.9020)
(42)液壓或氣動變速器閥門的鋁制閥體(如統計報告編號8481.90.9020所述)
(43) Angle cock handle assemblies, of iron and steel, each measuring 11.43 cm by 21.59 cm by 5.08 cm and weighing 0.748 kg (described in statistical reporting number 8481.90.9040)
(43)鐵和鋼制角旋塞手柄組件，每個尺寸為11.43 cm乘21.59 cm乘5.08 cm，重量為0.748 kg(統計報告編號8481.90.9040中描述)
(44) Armatures designed for use in hydraulic solenoid valves (described in statistical reporting number 8481.90.9040)
(44)設計用于液壓電磁閥的電樞(如統計報告編號8481.90.9040所述)
(45) C-poles, of steel, designed for use in hydraulic solenoid control valves (described in statistical reporting number 8481.90.9040)
(45)鋼制C型桿，設計用于液壓電磁控制閥(如統計報告編號8481.90.9040所述)
(46) Metering spools, of aluminum, designed for use in hydraulic solenoid control valves (described in statistical reporting number 8481.90.9040)
(46)設計用于液壓電磁控制閥的鋁制計量閥芯(如統計報告編號8481.90.9040所述)
(47) Pipe brackets of aluminum, each with 4 ports, the foregoing measuring 27.9 cm x 20.3 cm x 17.8 cm and weighing 11.34 kg, designed for installation into air brake control valves (described in statistical reporting number 8481.90.9040)
(47)鋁制管支架，每個管支架有4個端口，上述尺寸為27.9 cm x 20.3 cm x 17.8 cm，重量為11.34 kg，設計用于安裝到空氣制動控制閥中(如統計報告編號8481.90.9040所述)
(48) Poles, of steel, designed for use in hydraulic solenoid control valves (described in statistical reporting number 8481.90.9040)
(48)鋼制桿，設計用于液壓電磁控制閥(如統計報告編號8481.90.9040所述)
(49) Push pins, of steel, designed for use in hydraulic solenoid control valves (described in statistical reporting number 8481.90.9040)
(49)鋼制推銷，設計用于液壓電磁控制閥(統計報告編號8481.90.9040中有說明)
(50) Retainers, of steel, designed for use in hydraulic solenoid control valves (described in statistical reporting number 8481.90.9040)
(50)設計用于液壓電磁控制閥的鋼制保持器(如統計報告編號8481.90.9040所述)
(51) Coupling covers, including center members, flanged hubs, sleeves and shoes (described in statistical reporting number 8483.90.8010)
(51)聯軸器蓋，包括中心構件、法蘭輪轂、套筒和鞋(統計報告編號8483.90.8010中描述)
(52) Electric motors, AC, permanent split capacitor type, not exceeding 16 W (described in statistical reporting number 8501.10.4020)
(52)不超過16 W的交流永久分裂電容器型電動機(在統計報告編號8501.10.4020中描述)
(53) DC electric motors, of an output of less than 18.65 W, other than brushless, measuring less than 38 mm in diameter (described in statistical reporting number 8501.10.4060)
(53)直流電動機，輸出功率小于18.65 W，無刷除外，直徑小于38 mm(統計報告編號8501.10.4060中描述)
(54) DC motors, of an output exceeding 37.5 W but not exceeding 74.6 W, valued over $2 but not over $30 each (described in statistical reporting number 8501.31.2000)
(54)直流電機，輸出功率超過37.5 W但不超過74.6 W，每臺價值超過2美元但不超過30美元(統計報告編號8501.31.2000中描述)
(55) DC motors, electronically commutated, three-phase, eight-pole of a kind used in HVAC systems, of an output of 750 W, valued not over $100 each (described in statistical reporting number 8501.31.6000)
(55)用于暖通空調系統的電子換向三相八極直流電動機，輸出功率為750 W，每臺價值不超過100美元(統計報告編號8501.31.6000中描述)
(56) AC motors, multi-phase, of rolled steel frame construction (described in statistical reporting number 8501.51.4040)
(56)軋制鋼架結構的多相交流電機(統計報告編號8501.51.4040中有說明)
(57) AC motors, multi-phase, of an output of 186.5 kW or more but not exceeding 373 kW, having a cast iron frame construction (described in statistical reporting number 8501.53.8040)
(57)多相交流電動機，輸出功率為186.5千瓦或以上，但不超過373千瓦，具有鑄鐵框架結構(統計報告編號8501.53.8040中描述)
(58) AC multi-phase motors, each of an output exceeding 300 kW but not exceeding 310 kW, fitted with pulleys and brakes to raise and lower passenger elevators (described in statistical reporting number 8501.53.8040)
(58)交流多相電動機，每臺輸出功率超過300千瓦但不超過310千瓦，配有滑輪和制動器，用于升降乘客電梯(如統計報告編號8501.53.8040所述)
(59) Regenerative speed drive controllers for controlling speed of electric motors for elevators (described in statistical reporting number 8504.40.4000)
(59)用于控制電梯電動機速度的再生速度驅動控制器(在統計報告編號8504.40.4000中描述)
(60) Speed drive controllers for electric motors, each such controller measuring 100 mm or more but not over 130 mm in length, 40 mm or more but not over 125 mm in width and 24 mm or more but not over 85 mm in height (described in statistical reporting number 8504.40.4000)
(60)電動機的速度驅動控制器，每個此類控制器的長度為100 mm或以上但不超過130 mm，寬度為40 mm或以上，但不超過125 mm，高度為24 mm或以上且不超過85 mm(如統計報告編號8504.40.4000所述)
(61) Dual layer printed circuit board assemblies, each valued over $30 but not over $35 (described in statistical reporting number 8504.90.7500)
(61)雙層印刷電路板組件，每個組件的價值超過30美元，但不超過35美元(統計報告編號8504.90.7500中描述)
(62) Structural components for industrial furnaces (described in statistical reporting number 8514.90.8000)
(62)工業爐的結構部件(統計報告編號8514.90.8000中描述)
(63) Aluminum electrolytic capacitors, each valued not over $3.20 (described in statistical reporting number 8532.22.0085)
(63)鋁電解電容器，每個電容器的價值不超過3.20美元(如統計報告編號8532.22.0085所述)
(64) Rotary switches, rated at over 5 A, measuring not more than 5.5 cm by 5.0 cm by 3.4 cm, each with 2 to 8 spade terminals and an actuator shaft with D-shaped cross section (described in statistical reporting number 8536.50.9025)
(64)額定電流超過5A的旋轉開關，尺寸不超過5.5 cm×5.0 cm×3.4 cm，每個開關有2到8個扁平端子和一個D形橫截面的執行器軸(統計報告編號8536.50.9025中描述)
(65) Rotary switches, single pole, single throw (SPST), rated at over 5 A, each measuring not more than 14.6 cm by 8.9 cm by 14.1 cm (described in statistical reporting number 8536.50.9025)
(65)額定電流超過5A的單極單擲旋轉開關，每個開關的尺寸不超過14.6厘米乘8.9厘米乘14.1厘米(統計報告編號8536.50.9025中描述)
(66) Modular light switches, for a voltage not exceeding 1,000 V, presented in polyethylene terephthalate (PET) housings, designed for use with a backplate (described in statistical reporting number 8536.50.9065)
(66)模塊化電燈開關，電壓不超過1000 V，裝在聚對苯二甲酸乙二醇酯(PET)外殼中，設計用于背板(統計報告編號8536.50.9065中描述)
(67) Switches designed for use in motor vehicles, driver or passenger activated (described in statistical reporting number 8536.50.9065)
(67)設計用于機動車的開關，駕駛員或乘客激活(如統計報告編號8536.50.9065所述)
(68) Coaxial connectors, for a voltage not exceeding 1,000 V, valued over $0.20 but not over $0.30 each (described in statistical reporting number 8536.69.4010)
(68)同軸連接器，電壓不超過1000 V，每個價值超過0.20美元但不超過0.30美元(如統計報告編號8536.69.4010所述)
(69) Butt splice connectors, for a voltage not exceeding 1,000 V, each valued not over $3 (described in statistical reporting number 8536.90.4000)
(69)對接拼接連接器，電壓不超過1000 V，每個價值不超過3美元(統計報告編號8536.90.4000中描述)
(70) Ring terminals, for a voltage not exceeding 1,000 V (described in statistical reporting number 8536.90.4000)
(70)電壓不超過1000 V的環形端子(如統計報告編號8536.90.4000所述)
(71) Twist-on wire connectors, for a voltage not exceeding 1,000 V, each valued not over $0.03 (described in statistical reporting number 8536.90.4000)
(71)電壓不超過1000 V的絞合線連接器，每個值不超過0.03美元(統計報告編號8536.90.4000中描述)
(72) Zinc anodes for use with machines and apparatus for electroplating, electrolysis or electrophoresis (described in statistical reporting number 8543.30.9080)
(72)與電鍍、電解或電泳機器和設備一起使用的鋅陽極(如統計報告編號8543.30.9080所述)
(73) Stereoscopic microscopes, not provided with a means for photographing the image, valued not over $500 per unit (described in statistical reporting number 9011.10.8000)
(73)立體顯微鏡，不具備拍攝圖像的手段，每臺價值不超過500美元(統計報告編號9011.10.8000)
(74) Adapter rings, tubes and extension sleeves, stands and arm assemblies, stages and gliding tables, eyeguards and focusing racks, all the foregoing designed for use with compound optical microscopes (described in statistical reporting number 9011.90.0000)
(74)適配器環、管和延長套管、支架和臂組件、載物臺和滑動臺、護目鏡和聚焦架，所有上述設計用于復合光學顯微鏡(統計報告編號9011.90.0000中描述)
(75) Depth-sounding apparatus, each valued not over $50 (described in statistical reporting number 9014.80.2000)
(75)測深儀，每臺價值不超過50美元(統計報告編號9014.80.2000中描述)
(76) Weather station sets, each consisting of a monitoring display and outdoor weather sensors, having a transmission range of not over 140 m and valued not over $50 per set (described in statistical reporting number 9015.80.8080)
(76)氣象站套件，每套由監測顯示器和室外天氣傳感器組成，傳輸范圍不超過140米，每套價值不超過50美元(如統計報告編號9015.80.8080所述)
(77) Bismuth germanate crystals with set dimensional and surface finish requirements and used as a detection element in Positron Emission Tomography (PET) detectors (described in statistical reporting number 9018.19.9560)
(77)鍺酸鉍晶體，具有設定的尺寸和表面光潔度要求，并用作正電子發射斷層掃描(PET)探測器中的檢測元件(在統計報告編號9018.19.9560中描述)
(78) Parts and accessories of capnography monitors (described in statistical reporting number 9018.19.9560)
(78)二氧化碳監測儀的零件和附件(統計報告編號9018.19.9560中描述)
(79) Electrosurgical cautery pencils with electrical connectors (described in statistical reporting number 9018.90.6000)
(79)帶電連接器的電外科燒灼筆(統計報告編號9018.90.6000中描述)
(80) Combined positron emission tomography/computed tomography (PET/CT) scanners which utilize multiple PET gantries (frames) on a common base (described in statistical reporting number 9022.12.0000)
(80)正電子發射斷層掃描/計算機斷層掃描(PET/CT)組合掃描儀，其在一個公共底座上使用多個PET龍門架(框架)(在統計報告編號9022.12.0000中描述)
(81) Radiation therapy systems, each encased by steel-based structural shell with gantry cover comprising three pairs of plastics-based panels (described in statistical reporting number 9022.14.0000)
(81)放射治療系統，每個系統由鋼基結構外殼包裹，機架蓋包括三對塑料板(統計報告編號9022.14.0000中描述)
(82) X-ray tables (described in statistical reporting number 9022.90.2500)
(82)X射線表(統計報告編號9022.90.2500)
(83) X-ray tube housings and parts thereof (described in statistical reporting number 9022.90.4000)
(83)X射線管外殼及其零件(在統計報告編號9022.90.4000中描述)
(84) Multi-leaf collimators of radiotherapy systems based on the use of X-ray (described in statistical reporting number 9022.90.6000)
(84)基于X射線使用的放射治療系統的多葉準直器(在統計報告編號9022.90.6000中描述)
(85) Printed circuit board assemblies, of a kind designed for use in X-ray apparatus (described in statistical reporting number 9022.90.6000)
(85)設計用于X射線設備的印刷電路板組件(在統計報告編號9022.90.6000中描述)
(86) Vertical stands specially designed to support, contain or adjust the movement of X-ray digital detectors, or the X-ray tube and collimator in complete X-ray diagnostic systems (described in statistical reporting number 9022.90.6000)
(86)專門設計用于支撐、容納或調整X射線數字探測器或完整X射線診斷系統中的X射線管和準直器運動的垂直支架(如統計報告編號9022.90.6000所述)
(87) Inoculator sets of plastics, each consisting of a plate with multiple wells, a display tray, and a lid; when assembled, the set measuring 105 mm or more but not exceeding 108 mm in width, 138 mm or more but not exceeding 140 mm in depth, and 6.5 mm or less in thickness (described in statistical reporting number 9027.90.5650)
(87)塑料接種器組，每個接種器組由具有多個孔的板、展示托盤和蓋組成；組裝時，寬度為105 mm或以上但不超過108 mm，深度為138 mm或以上，但不超過140 mm，厚度為6.5 mm或以下的組件(如統計報告編號9027.90.5650所述)
(88) Thermostats designed for air conditioning or heating systems, not designed to connect to the internet, the foregoing designed for wall mounting (described in statistical reporting number 9032.10.0030)
(88)設計用于空調或供暖系統的恒溫器，不設計用于連接互聯網，上述恒溫器設計用于壁掛式安裝(統計報告編號9032.10.0030中描述)
(89) Battery balancers designed for regulating voltage across batteries, other than for 6, 12 or 24 volt systems (described in statistical reporting number 9032.89.4000)
(89)設計用于調節蓄電池兩端電壓的蓄電池平衡器，6伏、12伏或24伏系統除外(統計報告編號9032.89.4000中描述)
(ii) The U.S. Trade Representative determined to establish a process by which particular products classified in heading 9903.88.02 and provided for in U.S. notes 20(c) and 20(d) to this subchapter could be excluded from the additional duties imposed by heading 9903.88.02. See 83 Fed. Reg. 40823 (August 16, 2018) and 83 Fed. Reg. 47326 (September 18, 2018). Pursuant to the product exclusion process, the U.S. Trade Representative has determined that, as provided in heading 9903.88.67, the additional duties provided for in heading 9903.88.02 shall not apply to the following particular products, which are provided for in the enumerated statistical reporting numbers:
(ii)美國貿易代表決定制定一個程序，通過該程序，可將分類在第9903.88.02類中并在本分章美國注釋20(c)和20(d)中規定的特定產品排除在第99038.8.02類規定的額外關稅之外。參見83 Fed.Reg.40823(2018年8月16日)和83 Fed.Reg.47326(2018年9月18日)。根據產品排除程序，美國貿易代表已確定，根據第9903.88.67類的規定，第9903.88.02類規定的額外關稅不適用于列舉的統計報告數字中規定的以下特定產品：
(1) Acrylic acid-2-acrylamido-2-methylpropanesulfonic acid-acrylic ester (AA/AMPS/HPA) terpolymers, presented in dry form (described in statistical reporting number 3906.90.5000)
(1) 丙烯酸-2-丙烯酰胺-2-甲基丙磺酸丙烯酸酯(AA/AMPS/HPA)三元共聚物，以干燥形式存在(統計報告編號3906.90.5000中描述)
(2) Electrical tape of polyvinyl chloride, in rolls, measuring not more than 2 cm in width, not more than 20.2 m in length, and not more than 0.18 mm in thickness (described in statistical reporting number 3919.10.2020)
(2) 聚氯乙烯電工膠帶，成卷，寬度不超過2 cm，長度不超過20.2 m，厚度不超過0.18 mm(統計報告編號3919.10.2020中描述)
(3) Transparent tape of plastics with an acrylic emulsion adhesive, in rolls measuring not over 4.8 cm in width, valued not over $.25 per square meter (described in statistical reporting number 3919.10.2030)
(3) 帶丙烯酸乳液粘合劑的透明塑料帶，成卷，寬度不超過4.8厘米，價值不超過每平方米0.25美元(統計報告編號3919.10.2030)
(4) Rolls of polyethylene film coated with a solvent acrylic adhesive (described in statistical reporting number 3919.10.2055)
(4) 涂有溶劑丙烯酸粘合劑的聚乙烯薄膜卷(如統計報告編號3919.10.2055所述)
(5) Polyethylene film, 20.32 to 198.12 cm in width, and 30.5 to 2000.5 m in length, coated on one side with solvent acrylic adhesive, clear or in transparent colors, whether or not printed, in rolls (described in statistical reporting number 3919.90.5040 or 3919.90.5060)
(5) 聚乙烯薄膜，寬度20.32至198.12厘米，長度30.5至2000.5米，一面涂有溶劑丙烯酸粘合劑，透明或透明顏色，無論是否印刷，成卷(統計報告編號3919.90.5040或3919.90.5060中描述)
(6) Rolls of polyvinyl chloride, measuring 2.5 cm or more but not exceeding 5.1 cm in width and 182.9 m in length (described in statistical reporting number 3920.43.5000)
(6) 聚氯乙烯卷，尺寸為2.5厘米或以上，但寬度不超過5.1厘米，長度不超過182.9米(統計報告編號3920.43.5000中描述)
(7) Films coated on one or both sides with polyvinylidene chloride (PVdC) or polyvinyl alcohol (PVOH), whether or not having a primer layer between the base and coating; any of the foregoing having a total thickness greater than 0.01 mm but not greater than 0.03 mm (described in statistical reporting number 3920.62.0090)
(7) 用聚偏二氯乙烯(PVdC)或聚乙烯醇(PVOH)在一側或兩側涂覆的膜，無論在基底和涂層之間是否具有底漆層；總厚度大于0.01毫米但不大于0.03毫米的任何前述材料(在統計報告編號3920.62.090中描述)
(8) Printed film of polyvinyl chloride, laminated with foamed-polyvinyl chloride-coated polyester scrim, in rolls, of a kind used for lining shelves or drawers (described in statistical reporting number 3921.12.1100)
(8) 用于貨架或抽屜內襯的聚氯乙烯印刷薄膜，與發泡聚氯乙烯涂層聚酯粗布疊層，成卷(統計報告編號3921.12.1100中描述)
(9) Sheets and strips consisting of both cross-linked polyethylene and ethylene vinyl acetate, of a width greater than 1 m but not greater than 1.5 m, and a length greater than 1.75 m but not greater than 2.6 m (described in statistical reporting number 3921.19.0000)
(9) 由交聯聚乙烯和乙烯醋酸乙烯酯組成的片材和條帶，寬度大于1m但不大于1.5m，長度大于1.75m但不大于2.6m(統計報告編號3921.19.0000中描述)
(10) Gas (natural or liquid propane (LP)) engines each having a displacement of more than 2 liters but not more than 2.5 liters (described in statistical reporting number 8407.90.9010)
(10) 氣體(天然氣或液體丙烷(LP))發動機，每個發動機的排量大于2升但不超過2.5升(統計報告編號8407.90.9010中描述)
(11) Dispensers of hand-cleaning or hand-sanitizing solutions, whether employing a manual pump or a proximity-detecting battery-operated pump, each article weighing not more than 3 kg (described in statistical reporting number 8424.89.9000)
(11) 手部清潔或手部消毒溶液分配器，無論是使用手動泵還是接近檢測電池操作泵，每件物品重量不超過3公斤(統計報告編號8424.89.9000中描述)
(12) Walk behind rotary tillers, electric powered, individually weighing less than 14 kg (described in statistical reporting number 8432.29.0060)
(12) 行走式電動旋耕機，單個重量小于14公斤(統計報告編號8432.29.0060中有說明)
(13) AC motors, of 18.65 W or more but not exceeding 37.5 W, each with attached actuators, crankshafts or gears (described in statistical reporting number 8501.10.6020)
(13) 交流電機，功率為18.65 W或以上，但不超過37.5 W，每個電機都配有執行機構、曲軸或齒輪(如統計報告編號8501.10.6020所述)
(14) Electric motors, with an output of 18.65 W or more but not exceeding 37.5 W, with attached cables, designed for use in adjusting motor vehicle seats (described in statistical reporting number 8501.10.6080)
(14) 電動機，輸出功率為18.65 W或以上，但不超過37.5 W，帶連接電纜，設計用于調整機動車輛座椅(如統計報告編號8501.10.6080所述)
(15) DC electric motors, 12 V, with an output exceeding 74.6 W but not exceeding 735 W, with lead wires and electrical connector, measuring not over 75 mm outside diameter, with a housing not over 100 mm in length and a shaft not over 60 mm in length (described in statistical reporting number 8501.31.4000)
(15) 12 V直流電動機，輸出功率超過74.6 W但不超過735 W，帶引線和電連接器，外徑不超過75 mm，外殼長度不超過100 mm，軸長度不超過60 mm(統計報告編號8501.31.4000中描述)
(16) DC electric motors, 230 V, with an output not exceeding 140 W, measuring not more than 45 mm in diameter and not over 100 mm in length (described in statistical reporting number 8501.31.4000)
(16) 230 V直流電動機，輸出功率不超過140 W，直徑不超過45 mm，長度不超過100 mm(統計報告編號8501.31.4000中描述)
(17) DC electric motors, 24 V, with an output not exceeding 515 W, measuring not over 95 mm in outside diameter, not over 155 mm in length and with a shaft not over 30 mm in length (described in statistical reporting number 8501.31.4000)
(17) 24 V直流電動機，輸出功率不超過515 W，外徑不超過95 mm，長度不超過155 mm，軸長度不超過30 mm(統計報告編號8501.31.4000中描述)
(18) DC electric motors, with an output exceeding 74.6 W but not exceeding 735 W, containing lead wires and an electrical connector (described in statistical reporting number 8501.31.4000)
(18) 直流電動機，輸出功率超過74.6 W但不超過735 W，包含導線和電連接器(統計報告編號8501.31.4000中描述)
(19) DC motors with a power output exceeding 74.6 W but not exceeding 230 W, measuring less than 105 mm in diameter and 50 mm or more but not over 100 mm in length (described in statistical reporting number 8501.31.4000)
(19) 功率輸出超過74.6 W但不超過230 W，直徑小于105 mm，長度大于等于50 mm但不超過100 mm的直流電機(統計報告編號8501.31.4000中描述)
(20) DC motors, of an output exceeding 74.6 W but not exceeding 735 W, each valued not over $18 (described in statistical reporting number 8501.31.4000)
(20) 直流電動機，輸出功率超過74.6 W但不超過735 W，每臺價值不超過18美元(統計報告編號8501.31.4000中描述)
(21) Ground Fault Circuit Interrupters (GFCIs), Appliance Leakage Current Interrupters (ALCIs), Leakage Current Detection Interrupters (LCDIs), and Arc Fault Circuit Interrupters (AFCIs) (described in statistical reporting number 8536.30.8000)
(21)接地故障斷路器(GFCI)、電器漏電斷路器(ALCI)、漏電檢測斷路器(LCDI)和電弧故障斷路器
(22) Electronic AC passive infrared (PIR) motion sensing switches (described in statistical reporting number 8536.50.7000)
(22)電子交流無源紅外(PIR)運動傳感開關(統計報告編號8536.50.7000中描述)
(23) Position or speed sensors for motor vehicle transmission systems, each valued not over $12 (described in statistical reporting number 8543.70.4500)
(23)機動車輛傳動系統的位置或速度傳感器，每個傳感器的價值不超過12美元(如統計報告編號8543.70.4500所述)
(24) Wheel speed sensors for anti-lock motor vehicle braking systems, each valued not over $12 (described in statistical reporting number 8543.70.4500)
(24)用于防抱死機動車制動系統的車輪速度傳感器，每個傳感器的價值不超過12美元(如統計報告編號8543.70.4500所述)
(25) Apparatus using passive infrared detection sensors designed for turning lights on and off (described in statistical reporting number 8543.70.9960 prior to January 27, 2022; described in statistical reporting number 8543.70.9860 effective January 27, 2022)
(25)使用被動紅外檢測傳感器的設備，設計用于開燈和關燈(在2022年1月27日之前的統計報告編號8543.70.9960中進行了描述；在2022年元月27日生效的統計報告號8543.70.9860中進行了說明)
(26) Liquid leak detectors (described in statistical reporting number 8543.70.9960 prior to January 27, 2022; described in statistical reporting number 8543.70.9860 effective January 27, 2022)
(26)液體泄漏檢測器(2022年1月27日之前的統計報告編號8543.70.9960中描述；2022年1日27日生效的統計報告號8543.70.9860中描述)
(27) Robots, programmable, measuring not more than 40 cm high by 22 cm wide by 27 cm deep, incorporating an LCD display, camera and microphone but without "hands" (described in statistical reporting number 8543.70.9960 prior to January 27, 2022; described in statistical reporting number 8543.70.9860 effective January 27, 2022)
(27)可編程機器人，高度不超過40厘米，寬度不超過22厘米，深度不超過27厘米，包括液晶顯示器、攝像頭和麥克風，但沒有“手”(2022年1月27日之前的統計報告編號8543.70.9960中有描述；2022年1日27日生效的統計報告號碼8543.70.9860中有描述)
(28) Monopolar conductors for a voltage exceeding 1,000 V, other than of copper and not fitted with connectors (described in statistical reporting number 8544.60.6000)
(28)電壓超過1000 V的單極導體，銅導體除外，且未安裝連接器(統計報告編號8544.60.6000中描述)
(29) Follower block plates, designed for use with buffering/cushioning systems of freight railcars of heading 8606 (described in statistical reporting number 8607.30.1000)
(29)從動塊板，設計用于8606類貨物軌道車的緩沖/緩沖系統(如統計報告編號8607.30.1000所述)
(30) Motorcycles (including mopeds), with reciprocating internal combustion piston engine of a cylinder capacity not exceeding 50 cc, valued not over $500 each (described in statistical reporting number 8711.10.0000)
(30)摩托車(包括輕便摩托車)，配有氣缸容量不超過50立方厘米的往復式內燃活塞發動機，每輛價值不超過500美元(統計報告編號8711.10.0000中描述)
(31) Motorcycles with electric power for propulsion, each of a power not exceeding 1,000 W (described in statistical reporting numbers 8711.60.0050 or 8711.60.0090, effective July 1, 2019; described in statistical reporting number 8711.60.0000, effective prior to July 1, 2019)
(31)具有推進電力的摩托車，每輛功率不超過1000 W(統計報告編號8711.60.0050或8711.60.0090中描述，自2019年7月1日起生效；統計報告編號為8711.60.0000中描述，于2019年7月份1日前生效)
(32) Digital clinical thermometers (described in statistical reporting number 9025.19.8040 prior to July 1, 2020; described in statistical reporting number 9025.19.8010 or 9025.19.8020 effective July 1, 2020)
(32)數字臨床溫度計(在2020年7月1日之前的統計報告編號9025.19.8040中描述；在2020年6月1日生效的統計報告號9025.19.8010或9025.19.8020中描述)
(33) Digital clinical thermometers, valued not over $11 each (described in statistical reporting number 9025.19.8040 prior to July 1, 2020; described in statistical reporting number 9025.19.8010 or 9025.19.8020 effective July 1, 2020)
(33)數字臨床溫度計，每個價值不超過11美元(在2020年7月1日之前的統計報告編號9025.19.8040中描述；在2020年6月1日生效的統計報告號9025.19.8010或9025.19.8020中描述)
(34) Portable, wireless enabled, electrical gas monitors (described in statistical reporting number 9027.10.2000)
(34)便攜式無線氣體監測儀(統計報告編號9027.10.2000中描述)
(iii) The U.S. Trade Representative determined to establish a process by which particular products classified in heading 9903.88.03 and provided for in U.S. notes 20(e) and 20(f) to this subchapter could be excluded from the additional duties imposed by heading 9903.88.03, and by which particular products classified in heading 9903.88.04 and provided for in U.S. note 20(g) to this subchapter could be excluded from the additional duties imposed by heading 9903.88.04. See 83 Fed. Reg. 47974 (September 21, 2018) and 84 Fed. Reg. 29576 (June 24, 2019). Pursuant to the product exclusion process, the U.S. Trade Representative has determined that, as provided in heading 9903.88.67, the additional duties provided for in heading 9903.88.03 or in heading 9903.88.04 shall not apply to the following particular products, which are provided for in the enumerated statistical reporting numbers:
(iii)美國貿易代表決定制定一個程序，通過該程序，可將分類在第9903.88.03類中并在本分章美國注釋20(e)和20(f)中規定的特定產品排除在第99038.8.03類規定的額外關稅之外，根據該規定，分類在第9903.88.04類和本分章美國注釋20(g)中規定的特定產品可被排除在第99038.8.04類規定的額外關稅之外。參見《聯邦法規》第83卷第47974頁(2018年9月21日)和《聯邦法規條例》第84卷第29576頁(2019年6月24日)。根據產品排除程序，美國貿易代表已確定，根據第9903.88.67類的規定，第9903.88.03類或第9903.88.0 4類規定的額外關稅不適用于列舉的統計報告編號中規定的以下特定產品：
(1) 0304.72.5000
(2) 0304.83.1015
(3) 0304.83.1020
(4) 0304.83.5015
(5) 0304.83.5020
(6) 0304.83.5090
(7) 3923.21.0095
(8) 3926.20.9050
(9) 5603.12.0090 prior to July 1, 2022; 5603.12.0070 or 5603.12.0095 effective July 1, 2022
(9) 5603.12.0090，2022年7月1日之前；5603.12.0070或5603.12.0095，自2022年7月1日起生效
(10) 5603.14.9090
(11) 5603.92.0090 prior to July 1, 2022; 5603.92.0070 or 5603.92.0095 effective July 1, 2022
(11) 5603.92.0090，2022年7月1日之前；5603.92.0070或5603.92.0095于2022年7月1日生效
(12) 5603.93.0090
(13) 6505.00.8015
(14) 8424.90.9080
(15) 8425.31.0100
(16) 8708.50.8500
(17) 8712.00.1510
(18) 8712.00.1520
(19) 8712.00.1550
(20) Alaskan sole (yellowfin, rock or flathead), frozen in blocks, in cases with net weight of more than 4.5 kg (described in statistical reporting number 0304.83.5015)
(20) 阿拉斯加比目魚(黃鰭、巖石或平頭)，塊狀冷凍，凈重超過4.5公斤(統計報告編號0304.83.5015中描述)
(21) King crab meat, frozen in blocks each weighing at least 1 kg but not more than 1.2 kg, in airtight containers (described in statistical reporting number 1605.10.2010)
(21)帝王蟹肉，冷凍成塊，每個塊重至少1公斤，但不超過1.2公斤，裝在密封容器中(統計報告編號1605.10.2010中描述)
(22) Snow crab meat (C. opilio), frozen in blocks, in airtight containers each with net weight of not more than 1.2 kg (described in statistical reporting number 1605.10.2022)
(22)雪蟹肉(C.opilio)，分塊冷凍，裝在每個凈重不超過1.2公斤的密封容器中(統計報告編號1605.10.2022中描述)
(23) Dungeness crab meat, frozen in blocks, in airtight containers with net weight of not more than 1.2 kg (described in statistical reporting number 1605.10.2030)
(23)Dungeness蟹肉，塊狀冷凍，裝在凈重不超過1.2公斤的密封容器中(統計報告編號1605.10.2030中描述)
(24) Crab meat (other than King crab, Snow crab, Dungeness or swimming crabs), frozen in blocks, in airtight containers with net weight of not more than 1.5 kg (described in statistical reporting number 1605.10.2090)
(24)蟹肉(帝王蟹、雪蟹、鄧杰內斯蟹或梭子蟹除外)，分塊冷凍，裝在凈重不超過1.5公斤的密封容器中(統計報告編號1605.10.2090中描述)
(25) Sodium adipate (1,4-butanedicarboxylic acid, disodium salt) (IUPAC name: disodium hexanedioate) (CAS No. 7486-38-6) (described in statistical reporting number 2917.12.5000)
(25)己二酸鈉(1,4-丁二羧酸，二鈉鹽)(IUPAC名稱：己二酸二鈉)(CAS號7486-38-6)(統計報告號2917.12.5000中描述)
(26) 1-Cyanoguanidine (Dicyandiamide) (CAS No. 461-58-5) (described in statistical reporting number 2926.20.0000)
(26)1-氰基胍(雙氰胺)(CAS第461-58-5號)(在統計報告編號2926.20.0000中描述)
(27) N-(n-Butyl)thiophosphoric triamide (IUPAC name: N-Diaminophosphinothioylbutan-1-amine) (CAS No. 94317-64-3) (described in statistical reporting number 2929.90.5090)
(27)N-(正丁基)硫代磷酸三胺(IUPAC名稱：N-二氨基磷酰硫代丁-1-胺)(CAS編號94317-64-3)(統計報告編號2929.90.5090中描述)
(28) Artificial graphite, in powder form (described in statistical reporting number 3801.10.5000)
(28)粉末狀人造石墨(統計報告編號3801.10.5000)
(29) Artificial graphite, in powder or flake form, for manufacturing into the lithium-ion anode component of batteries (described in statistical reporting number 3801.10.5000)
(29)粉末或薄片形式的人造石墨，用于制造電池的鋰離子陽極組件(統計報告編號3801.10.5000中描述)
(30) Natural graphite, in powder form (described in statistical reporting number 3801.90.0000)
(30)粉末形式的天然石墨(統計報告編號3801.90.0000中描述)
(31) Herbicide consisting of 1,1'-dimethyl-4,4'-bipyridinium dichloride (CAS No. 1910-42-5) (Paraquat concentrate in liquid form) up to 45 percent concentration with application adjuvants (described in statistical reporting number 3808.93.1500)
(31)由1,1'-二甲基-4,4'-聯吡啶鎓二氯化物(CAS第1910-42-5號)(百草枯濃縮液，液體形式)組成的除草劑，最高濃度為45%，并使用助劑(統計報告編號3808.93.1500中描述)
(32) Supported nickel-based catalysts, of a kind used for methanation, desulfurization, hydrogenation, pre-reforming or reforming of organic chemicals or for protection of hydrotreating catalysts from arsine poisoning (described in statistical reporting number 3815.11.0000)
(32)負載型鎳基催化劑，用于有機化學品的甲烷化、脫硫、氫化、預重整或重整，或用于保護加氫處理催化劑免受砷化氫中毒(統計報告編號3815.11.0000中描述)
(33) Plate-type supported catalysts (reaction accelerators) for reduction of nitrous oxides (NOx) with enhanced mercury oxidation, with oxides of base metals being the active substances, applied to a stainless steel mesh (described in statistical reporting number 3815.19.0000)
(33)板式負載型催化劑(反應促進劑)，用于通過增強的汞氧化還原一氧化二氮(NOx)，其中賤金屬氧化物是活性物質，應用于不銹鋼網(統計報告編號3815.19.0000中描述)
(34) Plate-type supported catalysts (reaction accelerators) for reduction of nitrous oxides (NOx), with base metals being the active substances, applied on a titanium dioxide based ceramic material to a stainless steel mesh (described in statistical reporting number 3815.19.0000)
(34)用于還原一氧化二氮(NOx)的板式負載型催化劑(反應促進劑)，其中堿金屬為活性物質，應用于二氧化鈦基陶瓷材料上的不銹鋼網(在統計報告編號3815.19.0000中描述)
(35) Supported catalysts for polymerization (described in statistical reporting number 3815.19.0000)
(35)用于聚合的負載型催化劑(在統計報告編號3815.19.0000中描述)
(36) Supported catalysts of copper oxide or zinc oxide as the active ingredients for arsine removal (described in statistical reporting number 3815.19.0000)
(36)作為去除砷化氫的活性成分的氧化銅或氧化鋅的負載型催化劑(在統計報告編號3815.19.0000中描述)
(37) Supported catalysts with copper carbonate or zinc carbonate as the active ingredients for low temperature desulfurization (described in statistical reporting number 3815.19.0000)
(37)以碳酸銅或碳酸鋅為活性成分的負載型催化劑，用于低溫脫硫(在統計報告編號3815.19.0000中描述)
(38) Supported catalysts with metal sulfide as the active substance for mercury removal (described in statistical reporting number 3815.19.0000)
(38)以金屬硫化物作為除汞活性物質的負載型催化劑(統計報告編號3815.19.0000)
(39) Supported catalysts with molybdenum compounds as the active substance for hydrogenation (described in statistical reporting number 3815.19.0000)
(39)以鉬化合物為加氫活性物質的負載型催化劑(統計報告編號3815.19.0000中描述)
(40) Supported catalysts with zinc oxide absorbent as the active substance (described in statistical reporting number 3815.19.0000)
(40)具有氧化鋅吸收劑作為活性物質的負載型催化劑(在統計報告編號3815.19.0000中描述)
(41) Mixtures containing N,Ndimethyldodecan-1-amine (CAS No. 112-18-5) and N,N-dimethyltetradecan-1-amine (CAS No. 112-75-4) (described in statistical reporting number 3824.99.9297 prior to January 27, 2022; described in 3824.99.9397 effective January 27, 2022)
(41)含有N，N-二甲基十二烷-1-胺(CAS編號112-18-5)和N，N-二甲基十四烷-1-胺的混合物(CAS編號112-75-4)
(42) Mixtures of hydrofluorocarbons, containing 40 to 44 percent by weight of 1,1,1,2-tetrafluoroethane (CAS No. 811-97-2), 56 to 60 percent by weight of pentafluoroethane (CAS No. 354-33-6) and up to 2 percent by weight of lubricating oil (described in statistical reporting number 3824.78.0020 prior to January 27, 2022; described in statistical reporting number 3827.62.0000 effective January 27, 2022)
(42)含40-44重量%1，1，2-四氟乙烷的氫氟碳化物混合物(CAS No.811-97-2)，56至60重量%的五氟乙烷(CAS第354-33-6號)和高達2重量%的潤滑油(在2022年1月27日之前的統計報告編號3824.78.0020中描述；在2022年2月27日生效的統計報告號3827.62.000中描述)
(43) Refrigerant gas R-421B, comprising mixtures containing at least 83 percent but not more than 87 percent by weight of pentafluoroethane, at least 13 percent but not more than 17 percent by weight of 1,1,2,2-tetrafluoroethane, and at least 0.5 percent but not more than 2 percent by weight of lubricant (described in statistical reporting number 3824.78.0020 prior to January 27, 2022; described in statistical reporting number 3827.62.0000 effective January 27, 2022)
(43)制冷劑氣體R-421B，其包含含有至少83%但不超過87%重量的五氟乙烷、至少13%但不超過17%重量的1,1,2,2-四氟乙烷的混合物，以及至少0.5%但不超過2%(按重量計)的潤滑劑(2022年1月27日之前的統計報告編號3824.78.0020中描述；2022年1日27日生效的統計報告號3827.62.0000中描述)
(44) Injection molded polypropylene plastic caps or lids each weighing not over 24 grams designed for dispensing wet wipes (described in statistical reporting number 3923.50.0000)
(44)注塑聚丙烯塑料蓋或蓋子，每個重量不超過24克，設計用于分配濕巾(統計報告編號3923.50.0000中描述)
(45) One-piece stoppers, of polypropiolactone ("PPL") or polylactic acid ("PLA") polymers, each comprising a disc-shaped top attached to a rounded, tapered plug with a protruding stirrer, measuring at least 55 mm but not more than 120.7 mm in overall length, and weighing at least 0.6 g but not more than 1.1 g each, of a kind used with lids for beverage containers (described in statistical reporting number 3923.50.0000)
(45)由聚丙內酯(“PPL”)或聚乳酸(“PLA”)聚合物制成的一體式塞子，每個塞子包括連接到帶有突出攪拌器的圓形錐形塞子上的圓盤形頂部，總長度至少為55 mm但不超過120.7 mm，每個重量至少0.6 g但不超過1.1 g，與飲料容器蓋一起使用的類型(在統計報告編號3923.50.0000中描述)
(46) Endless synchronous belts of vulcanized rubber, molded polyurethane, neoprene, or welded urethane, each of an outside circumference of 60 cm or more but not more than 77 cm and a width of 2.5 cm or more but not exceeding 4 cm, weighing 0.18 kg or more but not exceeding 0.45 kg (described in statistical reporting number 4010.35.9000)
(46)硫化橡膠、成型聚氨酯、氯丁橡膠或焊接氨基甲酸酯制成的無端同步帶，每條帶的外圓周大于等于60 cm但不大于77 cm，寬度大于等于2.5 cm但不超過4 cm，重量大于等于0.18 kg但不超過0.45 kg(如統計報告編號4010.35.9000所述)
(47) Messenger bags of polyester, each measuring not more than 50 cm by 38 cm by 11 cm, weighing not more than 2.5 kg (described in statistical reporting number 4202.12.8130)
(47)聚酯斜挎包，每個尺寸不超過50 cm×38 cm×11 cm，重量不超過2.5 kg(統計報告編號4202.12.8130中描述)
(48) Backpacks with hydration system, each measuring not more than 51 cm by 28 cm by 9 cm, weighing not more than 1 kg (described in statistical reporting number 4202.92.0400)
(48)帶水合系統的背包，每個尺寸不超過51厘米乘28厘米乘9厘米，重量不超過1公斤(統計報告編號4202.92.0400中描述)
(49) Backpacks with outer surface of textile materials of man-made fibers, each measuring at least 35 cm but not more than 75 cm in height, at least 19 cm but not more than 34 cm in width, and at least 5 cm but not more than 26 cm in depth (described in statistical reporting number 4202.92.3120)
(49)外表面由人造纖維紡織材料制成的背包，每個高度至少35厘米但不超過75厘米，寬度至少19厘米但不多于34厘米，深度至少5厘米但不大于26厘米(統計報告編號4202.92.3120中描述)
(50) Duffel bags made predominantly of man-made fibers, weighing not more than 7 kg, with wheels (described in statistical reporting number 4202.92.3131)
(50)行李袋，主要由人造纖維制成，重量不超過7公斤，帶輪子(統計報告編號4202.92.3131中描述)
(51) Duffel bags of polyester, weighing not more than 7 kg (described in statistical reporting number 4202.92.3131)
(51)聚酯行李袋，重量不超過7公斤(統計報告編號4202.92.3131中描述)
(52) Covers, of leather, designed for use with telecommunication devices (described in statistical reporting number 4205.00.8000)
(52)設計用于電信設備的皮革外罩(統計報告編號4205.00.8000中有說明)
(53) Plates, bowls or cups of molded or pressed bamboo pulp, each weighing at least 3 g but not more than 92 g (described in statistical reporting number 4823.70.0020)
(53)模塑或壓制竹漿的盤子、碗或杯，每個重量至少為3克，但不超過92克(統計報告編號4823.70.0020中描述)
(54) Clamshell containers, pizza pans, lids, compartmentalized and other trays of molded or pressed bamboo pulp, each weighing at least 3 g but not more than 95 g (described in statistical reporting number 4823.70.0040)
(54)蛤殼容器、披薩鍋、蓋子、分隔托盤和其他模塑或壓制竹漿托盤，每個重量至少為3克，但不超過95克(統計報告編號4823.70.0040中描述)
(55) Silk fabrics, containing 85 percent or more by weight of silk or of silk waste other than noil silk, the foregoing not printed, not jacquard woven, measuring over 127 cm in width (described in statistical reporting number 5007.20.0065)
(55)絲綢織物，含有85%或85%以上的絲綢或除黑色絲綢以外的絲綢廢料，上述未經印刷，未經提花編織，寬度超過127厘米(統計報告編號5007.20.0065中描述)
(56) Silk fabrics, containing 85 percent or more by weight of silk or of silk waste other than noil silk, the foregoing not printed, not jacquard woven, measuring 107 cm or more but not over 127 cm in width (described in statistical reporting number 5007.20.0085)
(56)絲綢織物，含有85%或85%以上的絲綢或除黑色絲綢以外的絲綢廢料，上述未經印刷，未經提花編織，寬度107厘米或以上，但不超過127厘米(統計報告編號5007.20.0085中描述)
(57) Yarn of cashmere or camel hair, carded but not combed, not put up for retail sale (described in statistical reporting number 5108.10.8000)
(57)未零售的梳過但未梳過的羊絨或駝毛紗線(如統計報告編號5108.10.8000所述)
(58) Woven dyed fabrics of 100 percent textured polyester filament yarn, measuring 332.7 cm in width, weighing more than 170 g/m2 (described in statistical reporting number 5407.52.2060)
(58)寬度332.7厘米、重量超過170克/平方米的100%變形聚酯長絲機織染色織物(統計報告編號5407.52.2060中描述)
(59) Woven fabric of 100 percent textured polyester filaments, dyed, weighing more than 170 g/m2, measuring not more than 310 cm in width (described in statistical reporting number 5407.52.2060)
(59)100%紋理聚酯長絲機織物，染色，重量超過170 g/m2，寬度不超過310 cm(統計報告編號5407.52.2060中描述)
(60) Woven fabric of synthetic filament yarn containing 85 percent or more by weight of textured polyester filaments, dyed, measuring 249 cm in width, weighing more than 170 g/m2 (described in statistical reporting number 5407.52.2060)
(60)合成長絲機織物，含有85%或85%以上(按重量計)變形聚酯長絲，染色，寬度249厘米，重量超過170克/平方米(統計報告編號5407.52.2060中描述)
(61) Woven dupioni fabric wholly of non-textured dyed polyester filaments, weighing not more than 170 g/m2, measuring not more than 310 cm in width (described in statistical reporting number 5407.61.9930)
(61)杜皮奧尼機織物，全部由無紋理染色聚酯長絲制成，重量不超過170 g/m2，寬度不超過310厘米(統計報告編號5407.61.9930中描述)
(62) Woven fabric wholly of polyester, dyed, not flat, containing non-textured polyester filaments, weighing not more than 170 g/m2, measuring not over 310 cm in width (described in statistical reporting number 5407.61.9930)
(62)全聚酯機織物，染色，不平整，含有無紋理聚酯長絲，重量不超過170 g/m2，寬度不超過310厘米(統計報告編號5407.61.9930中描述)
(63) Woven fabric wholly of polyester, dyed, containing non-textured polyester filaments, weighing more than 170 g/m2, measuring not over 310 cm in width (described in statistical reporting number 5407.61.9935)
(63)全聚酯機織物，染色，含有無紋理聚酯長絲，重量超過170 g/m2，寬度不超過310 cm(統計報告編號5407.61.9935中描述)
(64) Woven fabric containing by weight 47 percent of nylon and 53 percent of polyester, dyed, containing textured filaments, weighing not more than 170 g/m2, measuring greater than 274 cm in width (described in statistical reporting number 5407.72.0015)
(64)機織物，按重量計含有47%的尼龍和53%的聚酯纖維，經染色，含有紋理絲，重量不超過170 g/m2，寬度大于274厘米(統計報告編號5407.72.0015中描述)
(65) Polyester filament tow, measuring more than 50 ktex but not more than 275 ktex (described in statistical reporting number 5501.20.0000)
(65)聚酯長絲絲束，尺寸大于50 ktex但不大于275 ktex(統計報告編號5501.20.0000中描述)
(66) Polypropylene fiber tow, measuring more than 50 ktex but not more than 275 ktex (described in statistical reporting number 5501.40.0000)
(66)聚丙烯纖維絲束，計量超過50 ktex但不超過275 ktex(統計報告編號5501.40.0000中描述)
(67) Woven dyed fabrics wholly of spun polyester, weighing more than 240 g/m2 and measuring not more than 310 cm in width (described in statistical reporting number 5512.19.0090)
(67)全紡聚酯機織染色織物，重量超過240克/平方米，寬度不超過310厘米(統計報告編號5512.19.0090)
(68) Non-woven fabrics of polyethylene terephthalate (PET), in sheets measuring not more than 160 cm by 250 cm, weighing more than 1,800 g/m2 but not more than 3,000 g/m2 (described in statistical reporting number 5603.94.9090)
(68)聚對苯二甲酸乙二醇酯(PET)無紡布，片材尺寸不超過160厘米乘250厘米，重量超過1800 g/m2但不超過3000 g/m2(統計報告編號5603.94.9090中描述)
(69) Rugs of hand-knotted pile, of nylon and polypropylene, measuring at least 1.2 m2 (described in statistical reporting number 5701.90.1010)
(69)尼龍和聚丙烯手工打結絨面，尺寸至少為1.2 m2(統計報告編號5701.90.1010中描述)
(70) Woven dyed embroidery fabrics containing by weight 55 percent of polyester and 45 percent of nylon, weighing less than 115 g/m2 and measuring 289 cm in width (described in statistical reporting number 5810.92.9080)
(70)機織染色刺繡織物，按重量計含有55%的聚酯纖維和45%的尼龍，重量小于115克/平方米，寬度289厘米(統計報告編號5810.92.9080中描述)
(71) Long pile knit fabrics, of acrylic pile on polyester ground, valued not over $16 per m2 (described in statistical reporting number 6001.10.2000)
(71)長絨頭針織物，聚酯地面丙烯酸絨頭，每平方米價值不超過16美元(統計報告編號6001.10.2000中描述)
(72) Knitted or crocheted fabrics of artificial staple fibers derived from bamboo (described in statistical reporting number 6003.40.6000)
(72)源自竹子的人造短纖維針織或鉤編織物(統計報告編號6003.40.6000中描述)
(73) Sandstone known as brown wave, of a kind used in outdoor living spaces, containing one textured side and up to four chiseled edges with a density of 2,750 kg/m3 (described in statistical reporting number 6802.99.0060 prior to July 1, 2023; described in statistical reporting number 6802.99.0090 effective July 1, 2023)
(73)被稱為棕色波浪的砂巖，一種用于戶外生活空間的砂巖，包含一個紋理側面和最多四個鑿邊，密度為2750 kg/m3(2023年7月1日之前的統計報告編號68029.09.060中有描述；2023年6月1日生效的統計報告號68029.9090中有描述)
(74) Sandstone with a flamed finish on one side and a length of 200 mm or more but not over 3,100 mm, a width of 100 mm or more but not over 1,380 mm and a thickness of 30 mm or more but not over 180 mm (described in statistical reporting number 6802.99.0060 prior to July 1, 2023; described in statistical reporting number 6802.99.0090 effective July 1, 2023)
(74)一側有火焰飾面的砂巖，長度為200 mm或以上但不超過3100 mm，寬度為100 mm或以上，但不超過1380 mm，厚度為30 mm或以上且不超過180 mm(2023年7月1日之前的統計報告編號68029.9060中有描述；2023年七月1日生效的統計報告號68029.9090中有說明)
(75) Grinding beads of yttria-stabilized zirconia (described in statistical reporting number 6909.11.2000)
(75)氧化釔穩定氧化鋯的研磨珠(在統計報告編號6909.11.2000中描述)
(76) Screen protectors of tempered safety glass, transparent, cut, and treated, with adhesive on one side, in rectangular sheets, each weighing at least 6 g but not more than 77 g, each measuring not less than 2.8 cm but not more than 28 cm in height, not less than 1.9 cm but not more than 21 cm in width, and not more than 0.1 cm in thickness (described in statistical reporting number 7007.19.0000)
(76)鋼化安全玻璃屏幕保護器，透明、切割和處理，一面帶粘合劑，矩形片，每塊重量至少為6 g但不超過77 g，每塊高度不小于2.8 cm但不大于28 cm，寬度不小于1.9 cm但不超過21 cm，厚度不超過0.1厘米(統計報告編號7007.19.0000中描述)
(77) Sheets of tempered safety glass, coated with silicone oxide, having a surface area of less than 2.5 m2, designed to be placed over solar cell panels for protection from external damage (described in statistical reporting number 7007.19.0000)
(77)表面面積小于2.5 m2的涂有氧化硅的鋼化安全玻璃板，設計用于放置在太陽能電池板上以防止外部損壞(統計報告編號7007.19.0000中描述)
(78) Rear-view mirrors of convex glass for motor vehicles, each measuring not less than 1.75 mm and not more than 2.4 mm in thickness, not less than 125 mm and not more than 210 mm in length, not less than 97 mm and not more than 180 mm in width, weighing not less than 74 g and not more than 188 g (described in statistical reporting number 7009.10.0000)
(78)機動車輛凸面鏡，每個凸面鏡的厚度不小于1.75 mm且不大于2.4 mm，長度不小于125 mm且不超過210 mm，寬度不小于97 mm且不多于180 mm，重量不小于74 g且不大于188 g(在統計報告編號7009.10.0000中描述)
(79) Rear-view mirrors of flat glass for motor vehicles, each measuring not less than 1.75 mm but not more than 2.4 mm in thickness, not less than 163 mm but not more than 210 mm in length, not less than 107 mm but not more than 167 mm in width and weighing not less than 80 g but not more than 188 g (described in statistical reporting number 7009.10.0000)
(79)機動車輛用平板玻璃后視鏡，每個后視鏡的厚度不小于1.75 mm但不大于2.4 mm，長度不小于163 mm但不超過210 mm，寬度不小于107 mm但不多于167 mm，重量不小于80 g但不大于188 g(如統計報告編號7009.10.0000所述)
(80) Tiles of non-recycled glass on a vinyl mesh backing, in a grid pattern of not less than 304 mm by 304 mm and not exceeding 305 mm by 305 mm, for mosaics or other decorative or construction purposes (described in statistical reporting number 7016.10.0000)
(80)用于馬賽克或其他裝飾或施工目的的乙烯基網背襯非再生玻璃瓷磚，網格圖案不小于304 mm×304 mm，不超過305 mm×305 mm(統計報告編號7016.10.0000中描述)
(81) Equipment for scaffolding, comprising powder coated or galvanized welded tubular steel frames, braces, guard rail systems, components and accessories, the foregoing for assembly into frame and brace configurations measuring at least 10 cm but not more than 3.3 m in height and at least 4 cm but not more than 8.8 m in width, weighing not more than 91 kg, with a load capacity not more than 2,750 kg (described in statistical reporting number 7308.40.0000)
(81)腳手架設備，包括粉末涂層或鍍鋅焊接管狀鋼框架、支架、護欄系統、組件和附件，用于組裝成框架和支架配置，高度至少為10 cm但不超過3.3 m，寬度至少為4 cm但不大于8.8 m，重量不超過91 kg，承載能力不超過2750 kg(如統計報告編號7308.40.0000所述)
(82) Portable outdoor cooker kits, consisting of at least a burner and stand made from steel and/or cast iron, with an adjustable pressure regulator/hose combination for connecting the burner to a source of natural gas or a portable container of liquefied propane (described in statistical reporting number 7321.11.1060)
(82)便攜式戶外炊具套件，至少包括一個燃燒器和鋼和/或鑄鐵支架，帶有可調節的壓力調節器/軟管組合，用于將燃燒器連接到天然氣源或液化丙烷便攜式容器(統計報告編號7321.11.1060中描述)
(83) Grills composed of steel wire, each measuring 49 cm by 47 cm (19.25 inches by 18.5 inches), weighing 0.36 kg (0.80 lbs.), designed as cooking surface of barbecue grill (described in statistical reporting number 7321.90.6090)
(83)由鋼絲組成的烤架，每個尺寸49厘米乘47厘米(19.25英寸乘18.5英寸)，重0.36公斤(0.80磅)，設計為燒烤架的烹飪表面(統計報告編號7321.90.6090中描述)
(84) Cable hooks of steel, each weighing not less than 0.2 kg, measuring not less than 9 cm in length, not less than 5 cm in width and not less than 1 cm in height with spring loaded closure gate (described in statistical reporting number 7326.90.8688)
(84)鋼制電纜鉤，每個重量不小于0.2 kg，長度不小于9 cm，寬度不小于5 cm，高度不小于1 cm，帶彈簧加載的閉合門(統計報告編號7326.90.8688中描述)
(85) Nickel hydroxy carbonate (CAS No. 12607-70-4) (described in statistical reporting number 7501.20.0000)
(85)羥基碳酸鎳(CAS 12607-70-4號)(統計報告編號7501.20.0000中描述)
(86) Mounting boards of aluminum for guitar sound modifying ("effect") devices, each consisting of an aluminum frame with above ground slots for the placement of devices and floor level slots for the on/off foot-operated pedal switches which control the modifying devices (described in statistical reporting number 7616.99.5190)
(86)用于吉他聲音修改(“效果”)裝置的鋁制安裝板，每個安裝板由一個鋁框架組成，該鋁框架具有用于放置裝置的地上插槽和用于控制修改裝置的腳踏開關的地板插槽(如統計報告編號7616.99.5190所述)
(87) Kitchen and table implements of iron or steel, non-electric, including but not limited to peelers, graters and whisks (described in statistical reporting number 8205.51.3030)
(87)非電動鐵或鋼制廚房和餐桌用具，包括但不限于削皮器、磨碎器和攪拌器(統計報告編號8205.51.3030中描述)
(88) Automotive polishing attachments specially designed for use with a hand-held drill, each attachment including a 9.5 mm steel drive shaft, internal gear assembly, transverse hand brace and rotating disk components (described in statistical reporting number 8207.90.7585)
(88)專門設計用于手持鉆機的汽車拋光附件，每個附件包括9.5 mm鋼驅動軸、內齒輪總成、橫向手撐和轉盤組件(統計報告編號8207.90.7585中描述)
(89) Bolt-on tips of carbon alloy steel of a kind used in tub or horizontal grinders (described in statistical reporting number 8207.90.7585)
(89)盆式或臥式研磨機中使用的一種碳合金鋼的螺栓連接尖端(如統計報告編號8207.90.7585所述)
(90) Flat panel display mounting adapters of base metal (described in statistical reporting number 8302.50.0000)
(90)賤金屬平板顯示器安裝適配器(統計報告編號8302.50.0000中描述)
(91) Stamped and formed brackets of steel (described in statistical reporting number 8302.50.0000)
(91)沖壓成型鋼支架(統計報告編號8302.50.0000中描述)
(92) Gun safes with digital keypads, of base metal, each weighing at least 148 kg but not more than 422 kg, measuring at least 141 cm but not more than 183 cm in height, at least 55 cm but not more than 107 cm in width and at least 40 cm but not more than 71 cm in depth (described in statistical reporting number 8303.00.0000)
(92)帶數字鍵盤的槍保險箱，賤金屬制，每個重量至少148公斤但不超過422公斤，高度至少141厘米但不超過183厘米，寬度至少55厘米但不多于107厘米，深度至少40厘米但不大于71厘米(統計報告編號8303.00.0000中描述)
(93) Parts suitable for use solely or principally with spark-ignition internal combustion piston engines of heading 8407 for marine propulsion (other than cast-iron parts, not advanced beyond cleaning, and machined only for the removal of fins, gates, sprues and risers or to permit location in finishing machinery or connecting rods) (described in statistical reporting number 8409.91.9290)
(93)適用于單獨或主要與8407品目的船用推進用火花點火式內燃活塞發動機一起使用的零件(鑄鐵零件除外，未推進到清潔之外，且僅用于去除翅片、澆口、澆口和立管或允許在精加工機械或連桿中定位的機加工零件)(如8409.91.9290號統計報告所述)
(94) Hydraulic valve lifters of steel with rollers, suitable for use solely or principally with spark-ignition internal combustion piston engines (other than for aircraft engines, marine propulsion engines or for vehicles of subheading 8701.20, or headings 8702, 8703 or 8704), each measuring 5 cm or more but not over 13 cm in length and 2.5 cm or more but not over 3.9 cm in diameter and weighing 135 g or more but not over 410 g (described in statistical reporting number 8409.91.9990)
(94)帶滾子的鋼制液壓氣門挺桿，適合單獨或主要與火花點火式內燃活塞發動機一起使用(不包括飛機發動機、船用推進發動機或第8701.20子目或第8702、8703或8704子目的車輛)，每個氣門挺桿長5厘米或以上但不超過13厘米，直徑2.5厘米或以上，但不超過3.9厘米，重量135克或以上但不得超過410克(統計報告編號8409.91.9990中描述)
(95) Solid valve lifters of steel, suitable for use solely or principally with spark-ignition internal combustion piston engines (other than for aircraft engines, marine propulsion engines or for vehicles of subheading 8701.20, or headings 8702, 8703 or 8704), each measuring 19 mm or more but not over 114 mm in length and 6 mm or more but not over 26 mm in diameter and weighing 20 g or more but not over 250 g (described in statistical reporting number 8409.91.9990)
(95)適合單獨或主要與火花點火式內燃活塞發動機一起使用的鋼制固體氣門挺桿(不包括飛機發動機、船用推進發動機或第8701.20子目或第8702、8703或8704子目的車輛)，每個氣門挺桿長19 mm或以上但不超過114 mm，直徑6 mm或以上，但不超過26 mm，重量20 g或以上但不得超過250 g(統計報告編號8409.91.9990中描述)
(96) Wind turbine hubs (described in statistical reporting number 8412.90.9081)
(96)風力渦輪機輪轂(統計報告編號8412.90.9081中描述)
(97) Cooling medium pumps for internal combustion piston engines of the motor vehicles of headings 8703 or 8704 (described in statistical reporting number 8413.30.9090)
(97)8703或8704類機動車輛內燃活塞發動機的冷卻介質泵(在統計報告編號8413.30.9090中描述)
(98) Vacuum pumps, each composed of a cast aluminum body and an unalloyed steel cover, measuring not more than 85 mm in length, not more than 75 mm in width and not more than 96 mm in height, with a pump volume not more than 200 cc, for use in automotive braking systems (described in statistical reporting number 8414.10.0000)
(98)用于汽車制動系統的真空泵，每個真空泵由鑄鋁主體和非合金鋼蓋組成，長度不超過85 mm，寬度不超過75 mm，高度不超過96 mm，泵容積不超過200 cc(在統計報告編號8414.10.0000中描述)
(99) Hand- or foot-operated air pumps, each weighing 400 g or more but not over 3 kg, with a maximum pressure of 1.52 MPa, imported with adapters for valves for tires and inner tubes (described in statistical reporting number 8414.20.0000)
(99)手動或腳踏空氣泵，每個重量400 g或以上，但不超過3 kg，最大壓力為1.52 MPa，進口時配有輪胎和內胎閥門適配器(統計報告編號8414.20.0000中描述)
(100) DC blowers for use in motor vehicle climate control systems, each measuring no less than 323 mm by 122 mm by 102 mm and no more than 357 mm by 214 mm by 167 mm (described in statistical reporting number 8414.59.6540)
(100)機動車輛氣候控制系統中使用的直流鼓風機，每個鼓風機的尺寸不小于323 mm×122 mm×102 mm，不大于357 mm×214 mm×167 mm(統計報告編號8414.59.6540中描述)
(101) DC centrifugal radial blowers, each measuring not less than 345 mm by 122 mm by 102 mm and not more than 355 mm by 173 mm by 145 mm, of an output of 100 W to 285 W, and weighing at least 1.80 kg but no more than 2.72 kg (described in statistical reporting number 8414.59.6560)
(101)直流離心式徑向鼓風機，每臺尺寸不小于345 mm×122 mm×102 mm，不大于355 mm×173 mm×145 mm，輸出功率為100 W至285 W，重量至少為1.80 kg但不超過2.72 kg(統計報告編號8414.59.6560中描述)
(102) Electric display cases incorporating refrigerating equipment designed for commercial use, each with a glass front to display the food or drink being stored (described in statistical reporting number 8418.50.0080)
(102)裝有商用制冷設備的電子展示柜，每個展示柜前面都有一個玻璃，用來展示儲存的食物或飲料(統計報告編號8418.50.0080中描述)
(103) Upright coolers incorporating refrigerating equipment, each measuring not more than 77 cm in width, not more than 78 cm in depth and not more than 200 cm in height, weighing not more than 127 kg, with one swing-type transparent glass door (described in statistical reporting number 8418.50.0080)
(103)立式冷卻器，包括制冷設備，每個寬度不超過77 cm，深度不超過78 cm，高度不超過200 cm，重量不超過127 kg，帶有一個擺動式透明玻璃門(統計報告編號8418.50.0080中描述)
(104) Compact portable shipping scales, of stainless steel, with a maximum weighing capacity of not more than 16 kg, with a digital display, weight below hook, and handles, measuring not less than 19 cm in width, not less than 21 cm in depth, not less than 3 cm in height but not more than 52 cm in width, not more than 41 cm in depth, not more than 13 cm in height (described in statistical reporting number 8423.81.0040)
(104)緊湊型便攜式運輸秤，不銹鋼制，最大稱重能力不超過16公斤，帶數字顯示器，重量在掛鉤和把手下方，寬度不小于19厘米，深度不小于21厘米，高度不小于3厘米，但寬度不超過52厘米，深度不超過41厘米，高度不超過13厘米(統計報告編號8423.81.0040中描述)
(105) Screw jacks and scissor jacks, each comprising a base, two lift arms and adjustable wheel pads, weighing at least 22 kg but not more than 42 kg, with a weight limit of not more than 342 kg (described in statistical reporting number 8425.49.0000)
(105)螺旋千斤頂和剪式千斤頂，每個千斤頂包括一個底座、兩個提升臂和可調節輪墊，重量至少為22 kg，但不超過42 kg，重量限制不超過342 kg(統計報告編號8425.49.0000中描述)
(106) Sewing machines, not of the household type, not specially designed to join footwear soles to uppers; each such machine weighing 45 kg or more but not over 140 kg, suitable for sewing leather (described in statistical reporting number 8452.29.9000)
(106)非家用縫紉機，非專門設計用于連接鞋底和鞋面的縫紉機；每臺重量為45公斤或以上但不超過140公斤的此類機器，適用于縫制皮革(統計報告編號8452.29.9000中描述)
(107) Trackpad input units for automatic data processing (ADP) machines, each valued over $100 (described in statistical reporting number 8471.60.9050)
(107)自動數據處理(ADP)機器的軌跡板輸入單元，每個價值超過100美元(統計報告編號8471.60.9050中描述)
(108) Printed circuit assemblies for rendering images onto computer screens (?graphics processing modules?) (described in statistical reporting number 8473.30.1180)
(108)用于在計算機屏幕上渲染圖像的印刷電路組件(圖形處理模塊)(如統計報告編號8473.30.1180所述)
(109) Printed circuit assemblies to enhance the graphics performance of automatic data processing (ADP) machines ("accelerator modules") (described in statistical reporting number 8473.30.1180)
(109)增強自動數據處理(ADP)機器圖形性能的印刷電路組件(“加速器模塊”)(在統計報告編號8473.30.1180中描述)
(110) Printed circuit assemblies, constituting unfinished logic boards (described in statistical reporting number 8473.30.1180)
(110)印刷電路組件，構成未完成的邏輯板(在統計報告編號8473.30.1180中描述)
(111) Parts and accessories of machines of heading 8471, whether or not incorporating fan hubs or LEDs but not incorporating other goods of heading 8541 or 8542 (described in statistical reporting number 8473.30.5100)
(111)第8471品目機器的零件和附件，無論是否包括風扇輪轂或LED，但不包括第8541或8542品目的其他貨物(在統計報告編號8473.30.5100中描述)
(112) Ratchet tie down straps, each consisting of straps of textiles measuring not less than 25 mm and not more than 105 mm in width and not more than 12.5 m in length, steel hooks at opposite ends of the straps and a gear and pawl mechanism for adjusting the length of the whole (described in statistical reporting number 8479.89.9499 prior to January 27, 2022; described in statistical reporting number 8479.89.9599 effective January 27, 2022)
(112)棘輪系緊帶，每條由寬度不小于25 mm且不大于105 mm且長度不大于12.5 m的紡織品帶組成，帶子兩端的鋼鉤和用于調整整體長度的齒輪和棘爪機構(2022年1月27日之前的統計報告編號8479.89.9499中有描述；2022年1日27日生效的統計報告號8479.89.9599中有描述)
(113) Hand-operated valves of plastics, each comprising a bottle lid, drinking spout and flavor dispensing valve (described in statistical reporting number 8481.80.5090)
(113)手動塑料閥門，每個閥門包括一個瓶蓋、飲用口和香料分配閥(統計報告編號8481.80.5090中描述)
(114) Single phase AC electric motors (other than gear motors), of an output of 56 W or more but not exceeding 69 W, each measuring no more than 9 cm in length and no more than 11.5 cm in diameter, weighing no more than 2 kg, in a housing of base metals, with a switch (described in statistical reporting number 8501.40.2040)
(114)單相交流電動機(齒輪電動機除外)，輸出功率為56 W或以上，但不超過69 W，每臺長度不超過9 cm，直徑不超過11.5 cm，重量不超過2 kg，裝在賤金屬外殼內，帶開關(統計報告編號8501.40.2040中描述)
(115) Electric gear motors, single phase AC, of an output of 74.6 W or more but not exceeding 228 W, each with a spring, a coupling, and a locking connector, the assembly measuring not more than 30 cm in length, not more than 11 cm in width, not more than 16 cm in height (described in statistical reporting number 8501.40.4020)
(115)單相交流電動齒輪電機，輸出功率為74.6 W或以上，但不超過228 W，每個電機都配有彈簧、聯軸器和鎖定連接器，組件長度不超過30 cm，寬度不超過11 cm，高度不超過16 cm(如統計報告編號8501.40.4020所述)
(116) AC motors, single phase, each of an output exceeding 74.6 W but not exceeding 335 W, measuring not more than 13 cm in diameter and not more than 13 cm in height and with a shaft measuring not more than 39 cm in length (described in statistical reporting number 8501.40.4040)
(116)單相交流電動機，每臺輸出功率超過74.6 W但不超過335 W，直徑不超過13 cm，高度不超過13厘米，軸長不超過39 cm(統計報告編號8501.40.4040中描述)
(117) Single-phase AC electric motors incorporating permanent split capacitors, each of an output range of 367 W or more but not exceeding 565 W, operating at not less than 115 V of alternating current (VAC) but not more than 230 VAC, capable of operating while submerged in water, each weighing at least 7 kg but not more than 11 kg, measuring not more than 10 cm in diameter and at least 22 cm but not exceeding 34 cm in length (described in statistical reporting number 8501.40.4040)
(117)包含永久分裂電容器的單相交流電動機，每個輸出范圍為367 W或更大但不超過565 W，在不低于115 V交流電(VAC)但不超過230 VAC的條件下運行，能夠在浸入水中時運行，每個重量至少為7 kg但不超過11 kg，直徑不超過10厘米，長度至少22厘米但不超過34厘米(統計報告編號8501.40.4040中描述)
(118) Single-phase AC electric motors, other than gear motors, whether or not incorporating permanent split capacitors, each of an output range of 746 W or more but not exceeding 1.13 kW, operating at not less than 115 V of alternating current (VAC) but not more than 250 VAC, capable of operating while submerged in water, each weighing at least 9 kg but not more than 12.5 kg, measuring not more than 10 cm in diameter and at least 25 cm but not exceeding 36 cm in length (described in statistical reporting number 8501.40.6040)
(118)單相交流電動機，不包括齒輪電動機，無論是否包含永久分裂電容器，每臺輸出范圍為746 W或以上但不超過1.13 kW，在不低于115 V交流電但不超過250 VAC的條件下運行，能夠在浸入水中時運行，每臺重量至少9 kg但不超過12.5 kg，直徑不超過10厘米，長度至少25厘米但不超過36厘米(統計報告編號8501.40.6040中描述)
(119) Power supplies for cable networks, that convert 120 V/60 Hz AC input to either 63 V AC or 87 V AC output, each measuring not more than 200 mm by 425 mm by 270 mm and weighing not more than 27.5 kg, containing printed circuit board assemblies, a transformer, and an oil filled capacitor (described in statistical reporting number 8504.40.8500)
(119)電纜網絡用電源，將120 V/60 Hz交流電輸入轉換為63 V交流電或87 V交流電輸出，每個尺寸不超過200 mm乘425 mm乘270 mm，重量不超過27.5 kg，包括印刷電路板組件、變壓器和充油電容器(如統計報告編號8504.40.8500所述)
(120) Static converters of a kind used to charge telecommunication apparatus in cars or homes, valued not over $2 each (described in statistical reporting number 8504.40.8500)
(120)一種用于為汽車或家庭中的電信設備充電的靜態轉換器，每臺價值不超過2美元(統計報告編號8504.40.8500中描述)
(121) Power adapters for a weather sensor or weather station display (described in statistical reporting number 8504.40.9580)
(121)用于天氣傳感器或氣象站顯示器的電源適配器(如統計報告編號8504.40.9580所述)
(122) Robotic vacuum cleaners designed for residential use, each with a self-contained electric motor of a power not exceeding 50 W and dust bag/receptacle capacity not exceeding 1 L, whether or not shipped with accessories (described in statistical reporting number 8508.11.0000)
(122)設計用于住宅的機器人真空吸塵器，每個吸塵器都配有功率不超過50 W的獨立電機和容量不超過1 L的防塵袋/插座，無論是否與附件一起裝運(統計報告編號8508.11.0000中描述)
(123) Vacuum cleaners, bagless, upright, each with self-contained electric motor of a power not exceeding 1,500 W and having a dust receptacle capacity not exceeding 1 liter (described in statistical reporting number 8508.11.0000)
(123)立式無袋真空吸塵器，每臺吸塵器配有獨立電機，功率不超過1500 W，灰塵容器容量不超過1升(統計報告編號8508.11.0000中描述)
(124) Starter motors for internal combustion gasoline engines designed for use in the lawn, automotive, watercraft, motorcycle, industrial and garden industries (described in statistical reporting number 8511.40.0000)
(124)設計用于草坪、汽車、船舶、摩托車、工業和園林工業的內燃汽油發動機起動馬達(統計報告編號8511.40.0000中描述)
(125) Projectors ("trumpets") of plastics for air horns (described in statistical reporting number 8512.90.2000)
(125)空氣喇叭用塑料投影儀(“喇叭”)(統計報告編號8512.90.2000中描述)
(126) Fan-forced portable electric heaters, each with a ceramic heating element (described in statistical reporting number 8516.29.0030)
(126)風扇強制便攜式電加熱器，每個加熱器都有一個陶瓷加熱元件(統計報告編號8516.29.0030中描述)
(127) Fan-forced, portable electric space heaters, each having a power consumption of not more than 1.5 kW and weighing more than 1.5 kg but not more than 17 kg, whether or not incorporating a humidifier or air filter (described in statistical reporting number 8516.29.0030)
(127)風扇驅動的便攜式空間電加熱器，每個加熱器的功耗不超過1.5千瓦，重量超過1.5公斤但不超過17公斤，無論是否裝有加濕器或空氣過濾器(統計報告編號8516.29.0030中描述)
(128) Electric fireplace inserts and free-standing electric fireplace heaters, rated at 5,000 British thermal units (BTUs) (described in statistical reporting number 8516.29.0090)
(128)電壁爐插件和獨立式電壁爐加熱器，額定熱量為5000英國熱量單位(BTU)(統計報告編號8516.29.0090中描述)
(129) Electric fireplaces, weighing not more than 55 kg (described in statistical reporting number 8516.29.0090)
(129)重量不超過55公斤的電壁爐(統計報告編號8516.29.0090中描述)
(130) Portable countertop air fryers of a kind used for domestic purposes (described in statistical reporting number 8516.60.4070)
(130)家用便攜式臺面空氣炸鍋(統計報告編號8516.60.4070)
(131) Tubular electric heating resistors (described in statistical reporting number 8516.80.8000)
(131)管狀電熱電阻器(統計報告編號8516.80.8000中描述)
(132) Closed-loop, digital, video security systems, each consisting of one 4-, 8- or 16-channel digital video recorder (DVR) that connects via cables to at least 2 but no more than 16 color television cameras in housings of plastics, cables and power adapters, put up for retail sale (described in statistical reporting number 8525.80.3010 prior to January 27, 2022; described in statistical reporting number 8525.83.0000 or 8525.89.3000 effective January 27, 2022)
(132)閉環數字視頻安全系統，每個系統由一個4、8或16通道數字視頻記錄器(DVR)組成，該DVR通過電纜連接到塑料、電纜和電源適配器外殼中的至少2個但不超過16個彩色電視攝像機，零售(在2022年1月27日之前的統計報告編號8525.80.3010中描述；在2022年2月27日生效的統計報告號8525.83.0000或8525.89.3000中描述)
(133) Color video cameras for use with microscopes, each camera with C-mount lens mount, weighing not more than 87 g, measuring not more than 109 mm in length and 31 mm in diameter, presented with a cable measuring not more than 1.5 m in length (described in statistical reporting number 8525.80.3010 prior to January 27, 2022; described in statistical reporting number 8525.81.0000, 8525.82.0000, or 8525.89.3000 effective January 27, 2022)
(133)與顯微鏡一起使用的彩色攝像機，每臺攝像機都配有C形透鏡支架，重量不超過87克，長度不超過109毫米，直徑不超過31毫米，提供長度不超過1.5米的電纜(2022年1月27日之前的統計報告編號8525.80.3010中有描述；2022年1月份27日生效的統計報告號8525.81萬、8525.82萬或8525.89.3萬中有描述)
(134) Digital color video cameras for use with microscopes, each camera with 10 megapixel resolution, weighing not more than 175 g, measuring 63 mm by 37 mm in length, presented with USB cable, reduction lens, eyepiece adapters, software CD and calibration slide (described in statistical reporting number 8525.80.3010 prior to January 27, 2022; described in statistical reporting number 8525.81.0000, 8525.82.0000, or 8525.89.3000 effective January 27, 2022)
(134)與顯微鏡一起使用的數字彩色攝像機，每臺攝像機的分辨率為1000萬像素，重量不超過175克，長63毫米乘37毫米，配有USB電纜、縮小鏡頭、目鏡適配器，軟件CD和校準幻燈片(在2022年1月27日之前的統計報告編號8525.80.3010中進行了描述；在統計報告編號8525.81.0000、8525.820.000或8525.89.3000中進行了說明，自2022年1月份27日起生效)
(135) Digital color video cameras for use with microscopes, each camera with autofocus, C-mount lens mount, 1080p resolution, weighing not more than 450 g, measuring not more than 67 mm by 67 mm by 81 mm, presented with AC power adapter and power cable (described in statistical reporting number 8525.80.3010 prior to January 27, 2022; described in statistical reporting number 8525.81.0000, 8525.82.0000, or 8525.89.3000 effective January 27, 2022)
(135)與顯微鏡一起使用的數字彩色攝像機，每臺攝像機都配有自動對焦、C型安裝透鏡架、1080p分辨率，重量不超過450 g，尺寸不超過67 mm×67 mm×81 mm，提供交流電源適配器和電源電纜(在2022年1月27日之前的統計報告編號8525.80.3010中進行了描述；在統計報告編號8525.81.0000、8525.820.000或8525.89.3000中進行了說明，自2022年1月份27日起生效)
(136) Printed circuit boards, each with a base wholly of plastics impregnated glass, not flexible, with 4 layers of copper (described in statistical reporting number 8534.00.0020)
(136)印刷電路板，每個印刷電路板的底座完全由塑料浸漬玻璃制成，不靈活，有4層銅(統計報告編號8534.00.0020中描述)
(137) Printed circuit boards, with a base of glass reinforced epoxy laminate material that is compliant with NEMA grade FR-4 fire resistance, not flexible, with 10 layers, designed for use in a flow meter, and measuring not more than 6.35 cm by 6.35 cm by 0.1575 cm (described in statistical reporting number 8534.00.0020)
(137)印刷電路板，基底為符合NEMA FR-4級耐火性的玻璃增強環氧樹脂層壓材料，不靈活，有10層，設計用于流量計，尺寸不超過6.35厘米乘6.35厘米乘以0.1575厘米(統計報告編號8534.00.0020中描述)
(138) Printed circuit boards, each with a base wholly of plastics impregnated glass, not flexible, with 2 layers of copper (described in statistical reporting number 8534.00.0040)
(138)印刷電路板，每個電路板的底座完全由塑料浸漬玻璃制成，不靈活，有2層銅(統計報告編號8534.00.0040中描述)
(139) Gas ignition safety controls, measuring 3.8 to 5.3 cm in height, 6.4 to 10.1 cm in width and 13.2 to 13.9 cm in depth; weighing 160 g to 380 g each; and valued not over $26 each; of a kind used in patio heaters, agricultural heaters or clothes dryers (described in statistical reporting number 8537.10.9170)
(139)氣體點火安全控制裝置，高度3.8至5.3厘米，寬度6.4至10.1厘米，深度13.2至13.9厘米；每個重量為160克至380克；每個價值不超過26美元；用于庭院加熱器、農業加熱器或干衣機的一種(統計報告編號8537.10.9170中描述)
(140) Digital sound processing apparatus capable of connecting to a wired or wireless network for the mixing of sound, each capable of mixing 16, 24, 32 or 64 channel, each measuring not more than 17 cm in height, not more than 60 cm in depth, and not more than 83 cm in width (described in statistical reporting number 8543.70.9100)
(140)數字聲音處理設備，能夠連接到有線或無線網絡進行聲音混合，每個能夠混合16、24、32或64聲道，每個高度不超過17厘米，深度不超過60厘米，寬度不超過83厘米(在統計報告編號8543.70.9100中描述)
(141) Insulated electric conductors for a voltage not exceeding 1,000 V, fitted with connectors of a kind used for telecommunications, each valued over $0.35 but not over $2 (described in statistical reporting number 8544.42.2000)
(141)電壓不超過1000伏的絕緣電導體，配有電信用連接器，每根價值超過0.35美元但不超過2美元(統計報告編號8544.42.2000中有說明)
(142) Extension cords of copper wire with polyvinyl chloride (PVC) sheaths, for a voltage not exceeding 1,000 V, each measuring at least 9 m but not longer than 16 m in length, with National Electrical Manufacturers Association (NEMA) type 5-15P plug on one end and NEMA type 5-15R receptacle on the other (described in statistical reporting number 8544.42.9010)
(142)帶聚氯乙烯(PVC)護套的銅線延長線，電壓不超過1000 V，每條長度至少為9 m，但不超過16 m，一端為美國電氣制造商協會(NEMA)5-15P型插頭，另一端為NEMA 5-15R型插座(統計報告編號8544.42.9010中描述)
(143) Extension cords of copper wire with polyvinyl chloride (PVC) sheaths, for a voltage not exceeding 1,000 V, each measuring at least 4 m but not longer than 16 m in length, with National Electrical Manufacturers Association (NEMA) type TT-30P plug on one end and NEMA type TT-30R receptacle on the other or NEMA type 14-50P plug on one end and NEMA type 14-50R receptacle on the other, with handles on each end in the shape of loops (described in statistical reporting number 8544.42.9090)
(143)帶聚氯乙烯(PVC)護套的銅線延長線，電壓不超過1000 V，每根長度至少為4 m，但不超過16 m，一端帶有美國電氣制造商協會(NEMA)TT-30P型插頭，另一端帶有NEMA TT-30R型插座，或一端帶有NEMA 14-50P型插頭和NEMA 14-50R型插座，每端都有環形把手(統計報告編號8544.42.9090中描述)
(144) Insulated conductors, not of a kind used for telecommunications, for a voltage not exceeding 1,000 V, each with polyvinyl chloride (PVC) covers and connectors at each end in bundles of 3, 5 or 6 for use in connecting patients to monitoring devices (described in statistical reporting number 8544.42.9090)
(144)電壓不超過1000 V的非電信用絕緣導線，每根導線的每端都有聚氯乙烯(PVC)蓋和連接器，每束3、5或6個，用于將患者連接到監測設備(統計報告編號8544.42.9090中描述)
(145) Junction box assemblies, of a kind used in solar panels, incorporating three bypass diodes and two insulated cables fitted with connectors, for a voltage not more than 1,000 V (described in statistical reporting number 8544.42.9090)
(145)太陽能電池板中使用的接線盒組件，包括三個旁路二極管和兩條帶連接器的絕緣電纜，電壓不超過1000 V(統計報告編號8544.42.9090中描述)
(146) Electrical insulators ("wire nuts") of plastics and steel (described in statistical reporting number 8546.90.0000)
(146)塑料和鋼制電絕緣體(“電線螺母”)(統計報告編號8546.90.0000中描述)
(147) Tire carrier attachments, roof racks, fender liners, side protective attachments, the foregoing of steel (described in statistical reporting number 8708.29.5060 prior to January 27, 2022; described in statistical reporting number 8708.29.5160 effective January 27, 2022)
(147)輪胎托架附件、車頂行李架、翼子板內襯、側面保護附件，上述鋼制附件(2022年1月27日之前的統計報告編號8708.29.5060中描述；2022年1日27日生效的統計報告號8708.29.5160中描述)
(148) Guide pins and guide bolts designed for use in brakes and servo-brakes of subheading 8708.30 (described in statistical reporting number 8708.30.5090)
(148)設計用于第8708.30子目的制動器和伺服制動器的導銷和導螺栓(在編號為8708.30.5090的統計報告中描述)
(149) Flange forgings of Society of Automotive Engineers (?SAE?) 1035 carbon steel (described in statistical reporting number 8708.40.7570)
(149)美國汽車工程師學會(SAE)1035碳鋼法蘭鍛件(統計報告編號8708.40.7570中描述)
(150) Hub forgings of Society of Automotive Engineers (?SAE?) 1035 carbon steel (described in statistical reporting number 8708.40.7570)
(150)美國汽車工程師學會(SAE)1035碳鋼輪轂鍛件(統計報告編號8708.40.7570中描述)
(151) Park gear blanks of Society of Automotive Engineers (?SAE?) 1520 carbon steel (described in statistical reporting number 8708.40.7570)
(151)美國汽車工程師學會(SAE)1520碳鋼的駐車齒輪毛坯(統計報告編號8708.40.7570中描述)
(152) Stator shafts of Stahlwerk Annahutte ZF34C grade carbon steel (described in statistical reporting number 8708.40.7570)
(152)Stahlwerk Annahutte ZF34C級碳鋼的定子軸(統計報告編號8708.40.7570中描述)
(153) Front output shafts of Society of Automotive Engineers ("SAE") 1045 carbon steel suitable for use in automatic transmission systems for passenger motor vehicles (described in statistical reporting number 8708.99.6890)
(153)適用于乘用車自動變速器系統的汽車工程師學會(“SAE”)1045碳鋼的前輸出軸(統計報告編號8708.99.6890中描述)
(154) Hitches receivers of steel, not suitable for towing applications, each receiver to be clamped onto the rear bumper of a recreational vehicle, such bumpers being square in section and measuring not more than 102 mm on a side (described in statistical reporting number 8708.99.8180)
(154)鋼制掛鉤接收器，不適用于牽引應用，每個接收器應夾緊在休閑車的后保險杠上，此類保險杠的截面為方形，側面尺寸不超過102 mm(統計報告編號8708.99.8180中描述)
(155) Bicycles, not motorized, each having aluminum- or magnesium- alloy wheels both measuring more than 69 cm but not more than 71 cm in diameter, tires of cross-sectional diameter of 3.5 cm, aluminum frame, a polyurethane/carbon fiber cord drive belt, 3-, 7- or 12-speed rear hub and twist shifter (described in statistical reporting number 8712.00.2500)
(155)非機動自行車，每輛自行車都有直徑大于69厘米但不大于71厘米的鋁合金或鎂合金車輪，橫截面直徑為3.5厘米的輪胎，鋁框架，聚氨酯/碳纖維繩索傳動帶，3速、7速或12速后輪轂和扭轉換檔器(統計報告編號8712.00.2500中描述)
(156) Single-speed bicycles having both wheels exceeding 63.5 cm in diameter, weighing less than 16.3 kg without accessories and not designed for use with tires having a cross-sectional diameter exceeding 4.13 cm (described in statistical reporting number 8712.00.2500)
(156)單速自行車，兩輪直徑超過63.5厘米，重量小于16.3公斤，無附件，且設計用于橫截面直徑超過4.13厘米的輪胎(統計報告編號8712.00.2500中描述)
(157) Bicycles, not motorized, having both wheels exceeding 63.5 cm in diameter, each having no more than three speeds and a coaster brake (described in statistical reporting number 8712.00.3500)
(157)非機動自行車，兩輪直徑超過63.5厘米，每輛速度不超過三個，并配有過山車制動器(統計報告編號8712.00.3500中有說明)
(158) Bicycle frames, of carbon fiber, valued not over $600 each (described in statistical reporting number 8714.91.3000)
(158)碳纖維自行車車架，每個價值不超過600美元(統計報告編號8714.91.3000)
(159) Wheeled trailers suitable for towing behind an adult bicycle, each comprising a frame of aluminum with a hitch mechanism, weighing not more than 17.5 kg, with a capacity of not more than 46 kg, with those trailers designated for carrying children meeting ASTM International standard F1975 (described in statistical reporting number 8716.40.0000)
(159)適合在成人自行車后面牽引的輪式拖車，每輛拖車包括一個帶掛接機構的鋁制框架，重量不超過17.5 kg，容量不超過46 kg，指定用于運載兒童的拖車符合ASTM國際標準F1975(統計報告編號8716.40.0000中描述)
(160) Casters, with diameter (including, where appropriate, tires) of 20 cm or more but not over 23 cm (described in statistical reporting number 8716.90.3000)
(160)直徑為20厘米或20厘米以上但不超過23厘米的腳輪(如適用，包括輪胎)(統計報告編號8716.90.3000中所述)
(161) Compound binocular optical microscopes (other than stereoscopic microscopes and microscopes for photomicrography, cinemicrography or microprojection), each with magnification of 40X or more but not exceeding 1,000X, weighing not more than 3 kg (described in statistical reporting number 9011.80.0000)
(161)復合雙目光學顯微鏡(立體顯微鏡和用于顯微照相、電影顯微照相或顯微投影的顯微鏡除外)，每臺顯微鏡的放大倍數為40倍或以上，但不超過1000倍，重量不超過3公斤(統計報告編號9011.80.0000中描述)
(162) Compound optical microscopes (other than stereoscopic microscopes and microscopes for photomicrography, cinemicrography or microprojection), each with magnification of 40X or more but not exceeding 400X, weighing not more than 15 kg (described in statistical reporting number 9011.80.0000)
(162)復合光學顯微鏡(立體顯微鏡和顯微照片、電影顯微照片或顯微投影顯微鏡除外)，每臺顯微鏡的放大倍數為40倍或以上，但不超過400倍，重量不超過15公斤(統計報告編號9011.80.0000中描述)
(163) Parts and accessories of meteorological instruments and appliances, each consisting of a wind vane made of plastics and base metal weighing no more than 25 g (described in statistical reporting number 9015.90.0190)
(163)氣象儀器和器具的零件和附件，每個零件和附件由重量不超過25克的塑料和賤金屬制成的風向標組成(統計報告編號9015.90.0190中描述)
(164) Parts and accessories of meteorological instruments and appliances, each consisting of an assembly comprising 3 rotating wind cups, bearings, an internal aspirating fan and one or more solar panels (described in statistical reporting number 9015.90.0190)
(164)氣象儀器和設備的零件和附件，每個零件和附件由一個組件組成，該組件包括3個旋轉風杯、軸承、一個內部抽風機和一個或多個太陽能電池板(統計報告編號9015.90.0190中描述)
(165) Parts and accessories of meteorological instruments and appliances, each consisting of an assembly made of plastic and metal comprising 3 wind cups weighing no more than 35 g (described in statistical reporting number 9015.90.0190)
(165)氣象儀器和設備的零件和附件，每個零件和附件由塑料和金屬制成的組件組成，包括3個重量不超過35克的風杯(在統計報告編號9015.90.0190中描述)
(166) Metal casings for, and metal parts of, thermometers of subheading 9025.11.40 designed for use in heating, ventilation and air conditioning (?HVAC?) equipment (described in statistical reporting number 9025.90.0600)
(166)第9025.11.40子目中設計用于加熱、通風和空調設備的溫度計的金屬外殼和金屬部件(在統計報告編號9025.90.0600中描述)
(167) Hand-held card counters, each consisting of a plastic case containing a circuit board, rechargeable battery and controls, weighing less than 1 kg (described in statistical reporting number 9029.10.8000)
(167)手持卡片計數器，每個計數器由一個裝有電路板、可充電電池和控制器的塑料盒組成，重量小于1公斤(統計報告編號9029.10.8000中描述)
(168) 60-minute mechanical count-down kitchen timers (described in statistical reporting number 9106.90.8500)
(168)60分鐘機械倒計時廚房計時器(如統計報告編號9106.90.8500所述)
(169) Upholstered seats with wooden frames other than chairs, not of cane, osier, bamboo or similar materials, each measuring at least 144 cm but no more than 214 cm in width, at least 81 cm but no more than 89 cm in height and at least 81 cm but not more than 163 cm in depth (described in statistical reporting number 9401.61.6011)
(169)帶木制框架的軟墊座椅，而非椅子，非藤條、藤條、竹子或類似材料制成，每個寬度至少144厘米但不超過214厘米，高度至少81厘米但不大于89厘米，深度至少81厘米，但不超過163厘米(統計報告編號9401.61.6011中描述)
(170) Stackable upholstered metal chairs for religious worship settings, capable of interlocking with each other, each with attached holders and racks (described in statistical reporting number 9401.71.0031)
(170)用于宗教禮拜場所的可堆疊軟墊金屬椅子，能夠相互聯鎖，每個椅子都配有固定的支架和支架(統計報告編號9401.71.0031中描述)
(171) Unassembled upholstered chairs with metal frames, other than household chairs, with seats and backs having a shell of plastics or wood and measuring at least 48 cm but not more than 61 cm in width (described in statistical reporting number 9401.71.0031)
(171)帶金屬框架的非組裝軟墊椅，家用椅除外，座椅和靠背為塑料或木制外殼，寬度至少為48厘米，但不超過61厘米(統計報告編號9401.71.0031中描述)
(172) Hunting stands of steel or aluminum (including ladder stands, pod stands, hang-on stands and climbing stands), each of which allows one or more hunters to ascend to a height and sit while waiting for game animals to appear (described in statistical reporting number 9401.79.0035)
(172)鋼制或鋁制狩獵架(包括梯架、吊艙架、懸掛架和攀爬架)，每個狩獵架允許一名或多名獵人上升到一定高度并坐著等待獵物出現(統計報告編號9401.79.0035中描述)
(173) Unassembled non-upholstered chairs with metal frames (other than household chairs) with seats and backs having a shell of plastics or wood and measuring at least 48 cm but not more than 61 cm in width (described in statistical reporting number 9401.79.0050)
(173)帶金屬框架的未組裝非軟墊椅子(家用椅子除外)，座椅和靠背為塑料或木制外殼，寬度至少為48厘米，但不超過61厘米(統計報告編號9401.79.0050中描述)
(174) Parts of chairs of unfinished plywood, including bodies, legs and arms (described in statistical reporting number 9401.90.4080 prior to January 27, 2022; described in statistical reporting number 9401.91.9090 effective January 27, 2022)
(174)未完工膠合板椅子的部件，包括身體、腿和手臂(2022年1月27日之前的統計報告編號9401.90.4080中描述；2022年1日27日生效的統計報告號9401.91.9090中描述)
(175) Bench frames of cast aluminum, each measuring at least 42 cm but not more than 79 cm in height, and at least 52 cm but not more than 62 cm in width (described in statistical reporting number 9401.90.5081 prior to January 27, 2022; described in statistical reporting number 9401.99.9081 effective January 27, 2022)
(175)鑄鋁臺架，每個臺架的高度至少為42厘米但不超過79厘米，寬度至少為52厘米但不大于62厘米(2022年1月27日之前的統計報告編號9401.90.5081中有說明；2022年1月份27日生效的統計報告號9401.99.9081中有說明)
(176) Chair frames of metal, each with integral bookshelf, capable of being stacked (described in statistical reporting number 9401.90.5081 prior to January 27, 2022; described in statistical reporting number 9401.99.9081 effective January 27, 2022)
(176)金屬椅子框架，每個都有整體書架，能夠堆疊(2022年1月27日之前的統計報告編號9401.90.5081中描述；2022年1日27日生效的統計報告號9401.99.9081中描述)
(177) Foot assemblies of base metal and rubber, designed for folding chairs (described in statistical reporting number 9401.90.5081 prior to January 27, 2022; described in statistical reporting number 9401.99.9081 effective January 27, 2022)
(177)設計用于折疊椅的賤金屬和橡膠腳組件(2022年1月27日之前的統計報告編號9401.90.5081中有說明；2022年1日27日生效的統計報告號9401.99.9081中有說明)
(178) Household furniture of metal and high-pressure laminated bamboo (other than ironing boards, furniture for infants or children or bed frames) (described in statistical reporting number 9403.20.0050)
(178)金屬和高壓層壓竹制成的家用家具(熨衣板、嬰兒或兒童家具或床架除外)(統計報告編號9403.20.0050中所述)
(179) Adjustable wire shelving units of steel, other than for household use, comprising vertical poles, foot caps or casters, clips and shelves, each when fully assembled measuring at least 35 cm or more but not more than 183 m in width, at least 35 cm but not more than 77 cm in depth, and at least 137 cm but not more than 183 cm in height (described in statistical reporting number 9403.20.0081 prior to July 1, 2022; described in statistical reporting number 9403.20.0082 effective July 1, 2022)
(179)除家用外的可調節鋼制擱架單元，包括垂直桿、腳帽或腳輪、夾子和擱架，每一個在完全組裝時寬度至少為35厘米或以上但不超過183米，深度至少為35 cm但不超過77厘米，身高至少137厘米但不超過183厘米(2022年7月1日之前的統計報告編號9403.20.0081中有描述；2022年7日1日生效的統計報告號9403.20.0082中有描述)
(180) Display racks of powder coated steel, whether or not on casters, whether or not with LED lighting, each measuring at least 60 cm but not more than 125 cm in length, at least 60 cm but not more than 125 cm in width and at least 130 cm but not more than 225 cm in height, with slanted shelves with a lip at the front edge of each that measures 3 cm or more in height (described in statistical reporting number 9403.20.0080 prior to July 1, 2019; described in statistical reporting number 9403.20.0081 effective July 1, 2019 through June 30, 2022; described in statistical reporting number 9403.20.0082 effective July 1, 2022)
(180)粉末涂層鋼制陳列架，無論是否在腳輪上，無論是否帶LED照明，每個陳列架的長度至少為60厘米但不超過125厘米，寬度至少為60 cm但不超過125cm，高度至少為130厘米但不大于225厘米，帶有傾斜貨架，每個貨架的前緣有一個唇緣，高度為3厘米或以上(2019年7月1日之前的統計報告編號9403.20.0080中描述；2019年7日1日至2022年6月30日有效的統計報告號9403.20.0081中描述；2022年7月一日有效的統計學報告號9403.2 0.0082中描述)
(180) Foldable tables with frames of steel and/or aluminum, each measuring 25 cm or more but not over 156 cm in length, 30 cm or more but not over 80 cm in width and 37 cm or more but not over 113 cm in height, with a tabletop surface of aluminum (described in statistical reporting number 9403.20.0090)
(180)帶鋼和/或鋁框架的可折疊桌子，每個桌子的長度為25厘米或以上，但不超過156厘米，寬度為30厘米或以上但不超過80厘米，高度為37厘米或以上且不超過113厘米，桌面表面為鋁(如統計報告編號9403.20.0090所述)
(182) Household furniture of high-pressure laminated bamboo, other than babies' or children's furniture (described in statistical reporting number 9403.82.0015)
(182)除嬰兒或兒童家具外的高壓層壓竹制家用家具(統計報告編號9403.82.0015中所述)
(183) Baby crib liners, each composed of two pieces of multi-layer warp polyester knit mesh without any padding, one measuring no more than 29 cm by 283 cm and the other measuring no more than 29 cm by 210 cm (described in statistical reporting number 9403.90.6005 prior to January 27, 2022; described in statistical reporting number 9403.99.5005 effective January 27, 2022)
(183)嬰兒床襯墊，每個襯墊由兩片多層經向聚酯針織網組成，無任何襯墊，一片尺寸不超過29厘米乘283厘米，另一片尺寸不得超過29厘米×210厘米(2022年1月27日之前的統計報告編號9403.90.6005中有描述；2022年1日27日生效的統計報告號9403.99.5005中有描述)
(184) Flameless pillar candles with LED lamps powered by batteries, each measuring at least 7.6 cm but not more than 20 cm in diameter and having a wax exterior (described in statistical reporting number 9405.40.8440 prior to January 27, 2022; described in statistical reporting number 9405.42.8440 effective January 27, 2022)
(184)帶LED燈的無焰柱蠟燭，由電池供電，每個直徑至少7.6厘米，但不超過20厘米，外部有蠟(2022年1月27日之前的統計報告編號9405.40.8440中描述；2022年1日27日生效的統計報告號9405.42.8440中描述)
(185) Flexible strips, each having embedded light-emitting diodes electrically connected to a molded electrical end connector, each strip wound onto a reel measuring not more than 25 cm in diameter and not more than 1.5 cm in width (described in statistical reporting number 9405.40.8440 prior to January 27, 2022; described in statistical reporting number 9405.42.8440 effective January 27, 2022)
(185)柔性條帶，每個柔性條帶具有與模制電端連接器電連接的嵌入式發光二極管，每個柔性帶帶纏繞在直徑不超過25厘米、寬度不超過1.5厘米的卷軸上(在2022年1月27日之前的統計報告編號9405.40.8440中描述；在2022年2月27日生效的統計報告號碼9405.42.8440中描述)
(186) Garden, patio and table top wick burning torches for outdoor use (described in statistical reporting number 9405.50.4000)
(186)室外花園、庭院和桌面燈芯燃燒器(統計報告編號9405.50.4000中描述)
(187) Lamp shades of fabric over metal frame (described in statistical reporting number 9405.99.4090)
(187)金屬框架上的織物燈罩(統計報告編號9405.99.4090中描述)
(iv) The U.S. Trade Representative determined to establish a process by which particular products classified in heading 9903.88.15 and provided for in U.S. notes 20(r) and (s) to this subchapter could be excluded from the additional duties imposed by heading 9903.88.15. See 84 Fed. Reg. 43304 (August 20, 2019), 84 Fed. Reg. 45821 (August 30, 2019), 84 Fed. Reg. 57144 (October 24, 2019) and 85 Fed. Reg. 3741 (January 22, 2020). Pursuant to the product exclusion process, the U.S. Trade Representative has determined that, as provided in heading 9903.88.67, the additional duties provided for in heading 9903.88.15 shall not apply to the following particular products, which are provided for in the following enumerated statistical reporting numbers:
(iv)美國貿易代表決定制定一個程序，通過該程序，可將第9903.88.15品目中分類的、本分章美國注釋20(r)和(S)中規定的特定產品排除在第9903.88.1品目規定的額外關稅之外。參見84 Fed.Reg.43304(2019年8月20日)、84 Fed.Reg.45821(2019年八月30日)、84Fed.Reg 57144(2019年10月24日)和85Fed.Reg.3741(2020年1月22日)。根據產品排除程序，美國貿易代表已確定，根據第9903.88.67類的規定，第9903.88.15類規定的額外關稅不適用于以下列舉的統計報告數字中規定的以下特定產品：
(1) 0505.10.0050
(2) 0505.10.0055
(3) 3401.19.0000
(4) 3926.90.9910
(5) 5210.11.4040
(6) 5210.11.6020
(7) 5504.10.0000
(8) 6506.10.6030
(9) Sodium alginate resins (CAS No. 9005-38-3) (described in statistical reporting number 3913.10.0000)
(9) 褐藻酸鈉樹脂(CAS編號9005-38-3)(統計報告編號3913.10 0000中描述)
(10) Shower heads of plastics, designed to be fixed, hand-held, height-adjustable or combinations thereof, and parts of such shower heads (described in statistical reporting number 3924.90.5650)
(10) 塑料淋浴噴頭，設計為固定式、手持式、高度可調或其組合，以及此類淋浴噴頭的部件(統計報告編號3924.90.5650中描述)
(11) Bowls of molded plastics, with clips for retaining guide wires during surgical procedures (described in statistical reporting number 3926.90.9990 prior to July 1, 2020; described in statistical reporting number 3926.90.9985 effective July 1, 2020)
(11) 模制塑料碗，帶有用于在手術過程中固定導絲的夾子(在2020年7月1日之前的統計報告編號3926.90.9990中描述；在2020年七月1日生效的統計報告號3926.90.9985中描述)
(12) Disposable graduated medicine dispensing cups of plastics (described in statistical reporting number 3926.90.9990 prior to July 1, 2020; described in statistical reporting number 3926.90.9985 effective July 1, 2020)
(12) 一次性刻度塑料配藥杯(2020年7月1日之前的統計報告編號3926.90.9990中描述；2020年7日1日生效的統計報告號3926.90.9985中描述)
(13) Sets of three polyvinyl chloride-coated foam pads, of plastics, of a kind used to assemble flotation work vests by passing adjustable straps with buckles through slots in the pads, each set comprising two irregularly shaped front/side pads and one rectangular back pad (described in statistical reporting number 3926.90.9990 prior to July 1, 2020; described in statistical reporting number 3926.90.9985 effective July 1, 2020)
(13) 三套聚氯乙烯涂層的塑料泡沫墊，用于組裝漂浮工作背心，通過將帶扣的可調節帶穿過墊中的槽，每套包括兩個不規則形狀的前/側墊和一個矩形后墊(在2020年7月1日之前的統計報告編號3926.90.9990中描述；在2020年七月1日生效的統計報告號3926.90.9985中描述)
(14) Single-use sterile drapes and covers of plastics, of a kind used to protect the sterile field in surgical operating rooms (described in statistical reporting number 3926.90.9990 prior to July 1, 2020; described in statistical reporting number 3926.90.9985 effective July 1, 2020)
(14) 一次性無菌塑料窗簾和覆蓋物，用于保護外科手術室的無菌區域(2020年7月1日之前的統計報告編號3926.90.9990中描述；2020年7日1日生效的統計報告號3926.90.9985中描述)
(15) Sterile decanters of polystyrene plastics, each of a kind used to transfer aseptic fluids or medication to and from sterile bags, vials or glass containers (described in statistical reporting number 3926.90.9990 prior to July 1, 2020; described in statistical reporting number 3926.90.9985 effective July 1, 2020)
(15) 聚苯乙烯塑料無菌潷析器，每種用于將無菌液體或藥物轉移到無菌袋、小瓶或玻璃容器中或從無菌袋、西林瓶或玻璃容器轉移無菌液體或藥品(2020年7月1日之前的統計報告編號3926.90.9990中有描述；2020年7日1日生效的統計報告號3926.90.9985中有描述)
(16) Wallpaper, other than described in subheading 4814.20.00, with floral, landscape, figure or abstract designs or solid backgrounds painted by hand, whether or not with applications of metal leaf (described in statistical reporting number 4814.90.0200)
(16) 除第4814.20.00子目所述外，具有花卉、風景、人物或抽象設計或手繪實心背景的壁紙，無論是否使用金屬葉(統計報告編號4814.90.0200所述)
(17) Women's knit robes in chief weight of cotton, with hook and loop tab closure (described in statistical reporting number 6108.91.0030)
(17) 女式針織長袍，主要重量為棉，帶鉤環搭扣(統計報告編號6108.91.0030中描述)
(18) Babies' gowns of cotton knitted interlock fabric, each with sleeves, neck opening and elasticized bottom opening (described in statistical reporting number 6111.20.6070)
(18) 棉針織聯鎖織物嬰兒禮服，每件都有袖子、頸部開口和彈性底部開口(統計報告編號6111.20.6070中描述)
(19) Babies' sleep sacks of cotton interlock knitted fabric, sleeveless, each with neck opening and two-way zipper (described in statistical reporting number 6111.20.6070)
(19) 嬰兒睡袋，棉質互鎖針織面料，無袖，每個都有頸口和雙向拉鏈(統計報告編號6111.20.6070中描述)
(20) Babies' sleep sacks, knitted, of cotton, each with neck opening and two-way zipper (described in statistical reporting number 6111.20.6070)
(20) 棉質針織嬰兒睡袋，每個睡袋都有頸口和雙向拉鏈(統計報告編號6111.20.6070中描述)
(21) Babies' swaddle sacks of cotton knitted interlock fabric, each with sleeves and mitten cuffs (described in statistical reporting number 6111.20.6070)
(21)棉針織互鎖織物嬰兒襁褓袋，每袋帶袖子和手套袖口(統計報告編號6111.20.6070中描述)
(22) Babies' blanket sleepers of polyester knitted fleece, sleeveless, each with two-way zipper (described in statistical reporting number 6111.30.5015)
(22)聚酯針織搖粒絨無袖嬰兒床，每床帶雙向拉鏈(統計報告編號6111.30.5015中描述)
(23) Men's and boys' cotton terry bathrobes with muslin trim, each beltless but featuring a hook-and-loop tab (described in statistical reporting number 6207.91.1000)
(23)男士和男童棉質毛圈浴袍，帶平紋細布鑲邊，每件無腰帶，但有一個鉤環扣(統計報告編號6207.91.1000中描述)
(24) Girls' cotton terry bathrobes with muslin trim, each beltless but featuring a hook-and-loop tab (described in statistical reporting number 6208.91.1020)
(24)女孩棉質毛圈浴袍，帶平紋細布鑲邊，每件無腰帶，但有一個鉤環扣(統計報告編號6208.91.1020中描述)
(25) Girls' fleece bathrobes, each beltless but featuring a hook-and-loop tab (described in statistical reporting number 6208.92.0020)
(25)女孩羊毛浴袍，每件無腰帶，但有一個鉤環扣(統計報告編號6208.92.0020中描述)
(26) Blankets (other than electric blankets) of cotton, woven, each measuring at least 116 cm but not more than 118 cm on an edge (described in statistical reporting number 6301.30.0010)
(26)棉質編織毯子(電熱毯除外)，每一條邊緣至少116厘米，但不超過118厘米(統計報告編號6301.30.00010中描述)
(27) Blankets (other than electric blankets) of cotton, other than woven, each measuring at least 116 cm but not more than 118 cm on an edge (described in statistical reporting number 6301.30.0020)
(27)棉制毯子(電熱毯除外)，編織的除外，每條毯子邊緣至少116厘米，但不超過118厘米(統計報告編號6301.30.00020中描述)
(28) Dust covers of knitted polyester fabric, designed for bed mattresses and pillows (described in statistical reporting number 6302.10.0020)
(28)針織聚酯織物防塵罩，設計用于床墊和枕頭(如統計報告編號6302.10.002所述)
(29) Crib sheets of muslin cotton, fitted with elastic (described in statistical reporting number 6302.31.9020)
(29)細布棉嬰兒床床單，配有松緊帶(統計報告編號6302.31.9020中描述)
(30) Protective covers of cotton for pillows, not knitted or crocheted, of cotton, not napped or printed, each with full encasement construction and zipper opening (described in statistical reporting number 6302.31.9040)
(30)棉制枕頭保護套，非針織或鉤編，棉制，非尿布或印花，每個保護套都有完整的外殼結構和拉鏈開口(如統計報告編號6302.31.9040所述)
(31) Laparotomy sponges of cotton (described in statistical reporting number 6307.90.9889 prior to July 1, 2020; described in statistical reporting number 6307.90.9891 effective July 1, 2020)
(31)棉拉帕切開術海綿(2020年7月1日前統計報告編號6307.90.9889中描述；2020年7日1日起統計報告編號為6307.90.9891中描述)
(32) Single-use stethoscope covers (described in statistical reporting number 6307.90.9889 prior to July 1, 2020; described in statistical reporting number 6307.90.9891 effective July 1, 2020)
(32)一次性聽診器覆蓋物(在2020年7月1日之前的統計報告編號6307.90.9889中描述；在2020年七月一日生效的統計報告號6307.90.9891中描述)
(33) Athletic, recreational and sporting headgear comprising shells of polyvinyl chloride, polycarbonate plastic or acrylonitrile butadiene styrene, each with an inner liner of expanded polypropylene or expanded polystyrene, designed for use with bicycles (described in statistical reporting number 6506.10.6045)
(33)運動、娛樂和運動頭盔，包括聚氯乙烯、聚碳酸酯塑料或丙烯腈-丁二烯-苯乙烯外殼，每個外殼都有膨脹聚丙烯或膨脹聚苯乙烯內襯，設計用于自行車(統計報告編號6506.10.6045中描述)
(34) Sewing machines of the household type, each weighing not more than 22.5 kg, having a touch screen control, a sewing light, a presser foot lifter and an automatic needle threader (described in statistical reporting number 8452.10.0090)
(34)家用縫紉機，每臺重量不超過22.5公斤，配有觸摸屏控制器、縫紉燈、壓腳升降機和自動穿針機(統計報告編號8452.10.0090中描述)
(35) Tracking devices, each device measuring not more than 86 mm on a side (if rectangular) or 28 mm in diameter (if circular) and not more than 7.5 mm in thickness, not weighing more than 15 g, designed to be attached to another article and to establish a Bluetooth connection with another device for the purposes of providing relative location information (described in statistical reporting number 8517.62.0090)
(35)跟蹤裝置，每個裝置的側面(如果是矩形)不超過86 mm，直徑(如果是圓形)不超過28 mm，厚度不超過7.5 mm，重量不超過15 g，設計用于連接到另一物品并與另一設備建立藍牙連接，以提供相對位置信息(在統計報告編號8517.62.0090中描述)
(36) Wireless communication apparatus that can receive audio data to be distributed to wireless speakers (described in statistical reporting number 8518.22.0000)
(36)可以接收要分發給無線揚聲器的音頻數據的無線通信設備(在統計報告編號8518.22.0000中描述)
(37) Liquid crystal display ("LCD") modules, not capable of receiving or processing a broadcast television signal, each with a video display diagonal measuring not more than 191 cm (described in statistical reporting number 9013.80.9000 prior to January 27, 2022, described in statistical reporting number 8524.11.9000 effective January 27, 2022)
(37)液晶顯示器(“LCD”)模塊，無法接收或處理廣播電視信號，每個模塊的視頻顯示對角線不超過191厘米(2022年1月27日之前的統計報告編號9013.80.9000中有描述，2022年1月份27日生效的統計報告號8524.11.9000中有描述)
(38) Television liquid crystal display ("LCD") main board assemblies, each consisting of a printed circuit board containing a television tuner and audio and video components (described in statistical reporting number 8529.90.1300)
(38)電視液晶顯示器(“LCD”)主板組件，每個組件由一個印刷電路板組成，該電路板包含一個電視調諧器以及音頻和視頻組件(統計報告編號8529.90/1300中描述)
(39) Protective Articles (described in statistical reporting number 9004.90.0000 prior to January 1, 2021; described in statistical reporting number 9004.90.0010 or 9004.90.0090 effective January 1, 2021)
(39)防護用品(2021年1月1日之前的統計報告編號9004.90.0000中描述；2021年1日生效的統計報告號9004.90.0010或9004.90.0090中描述)
(40) Prism binoculars, other than for use with infrared light, comprising a plastic, aluminum or magnesium alloy body with a rubber jacket, with magnification ranging from at least 4X but not more than 22X and aperture ranging from at least 21 mm but not more than 56 mm (described in statistical reporting number 9005.10.0040)
(40)棱鏡雙筒望遠鏡，非用于紅外光，包括塑料、鋁或鎂合金機身和橡膠套，放大倍數至少為4倍但不超過22倍，孔徑至少為21毫米但不超過56毫米(統計報告編號9005.10.0040中描述)
(41) Parts of child safety seats (described in statistical reporting number 9401.90.1085 prior to January 27, 2022; described in statistical reporting number 9401.91.1500 or 9401.99.1085 effective January 27, 2022)
(41)兒童安全座椅的零件(2022年1月27日之前的統計報告編號9401.90.1085中描述；2022年1日27日生效的統計報告號9401.91.1500或9401.99.1085中描述)
(42) Pillow shells of cotton, each filled with goose or duck down (described in statistical reporting number 9404.90.1000 prior to January 1, 2023; described in statistical reporting number 9404.90.1060 or statistical reporting number 9404.90.1090 effective January 1, 2023)
(42)棉制枕套，每個枕套內填充鵝絨或鴨絨(2023年1月1日前統計報告編號9404.90.1000中描述；2023年01月1日起統計報告編號940 4.90.1060或統計報告編號94 4.90.1090中描述)